Whirlpool RF310PXA Anti-tip bracket, Optional door panel pat, Almond Kii No

The anti-tip bracket

The range will not tip during normal use. However, tipping can occur if you apply too much force or weight to the open door without the anti-tip bracket properly secured.

Personal Injury Hazard

.To reduce risk of range tipping over, secure range with a properly installed anti-tip bracket supplied with range or an optional wall- mounted anti-tip bracket kit.

l If range is moved for cleaning or service, check that anti-tip device is engaged before using range.

Failure to follow the above precautions can result in personal injury.

To verify the anti-tip bracket is engaged (if you have a floor bracket):

l Remove the storage drawer. (See page 16.) l Look to see if the anti-tip bracket is attached

to floor with screws.

l Make sure one rear leveling leg is positioned under the anti-tip bracket.

l See Installation Instructions for further details.

To verify the anti-tip bracket is engaged (if you have a wall bracket):

l Look to see if the anti-tip bracket is attached with screws to the wall behind the control panel.

lMake sure the cable on the back of the range is secured by the two hooks on the bracket.

l Cable must be unhooked from wall bracket to move range for cleaning or service. Recon- nect cable before using range.

l See Installation Instructions for further details.

Optional door panel pat

If you would like to change the color of your oven door glass to white or almond, you can order one of these kiis from your Whirlpool Dealer. The kits include easy installation instructions.

l White (Kit No. 814069)

l Almond (Kii No. 814070)

Rear leveling

leg

Floor bracket

Cable

EELS control panel)

Wall bracket

17