3.Pull the surface unit straight away from the receptacle.
4.Lift out the reflector bowl. On Model RF365PXY, Q series, also lift out the trim ring. See “Cleaning chart” on page 25 for cleaning instructions.
(Model RF365PXY, Q series, shown)
Replacing
1.Make sure all surface units are off and cool before replacing surface units and reflector bowls.
2.Line up openings in the reflector bowl and (Model RF365PXY, Q series) notches in the trim ring with the surface unit receptacle and the element
(Model RF365PXY, Q series, shown)
23