3.Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the receptacle.
4.When terminal is pushed into the recep- tacle as far as it will go, push down the edge of the surface unit opposite the recep- tacle. The element
NOTE: Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl or trim ring gets discolored,
some of your utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go into or around a utensil goes down and heats the reflector bowl or trim ring. This extra heat can discolor it.
Lift-up cooktop
1.Lift front of cooktoo at both front corners until the support rods lock into place.
l
l
Personal Injury and
Product Damage Hazard
Be sure both support rods are fully extended and in the locked position. Failure to do so could result in personal injury from the cooktop accidentally falling.
Do not drop the cooktop. Damage can result to the porcelain and the cooktop frame.
2.Wipe with warm, soapy water. Use a soapy
3.To lower the cooktop, lift cooktop from both sides while pressing the support rods back to unlock them. Lower the cooktop into place.
24
