Install Range Hood

1.Remove terminal box cover. Depending on your installation, remove either back or top wiring knockout.

A

A. Terminal box cover

2.Remove the rectangular and round vent connectors from hood. Set the connectors and screws aside for use if connecting to a rectangular vent system.

3.For vented installations:

■Check that the louver cover is installed in front of hood.

■Remove either top or rear rectangular vent knockout. If using round vent, remove both top rectangular and semicircular knockouts.

■If using rectangular vent, attach rectangular damper/vent connectors.

■Reinstall round vent connector.

NOTE: If the wall cap is directly behind the vent connector, the dampers in the connector and wall cap must not interfere with each other. Remove the vent connector damper if they interfere.

For non-vented installations:

■Remove louver cover from front of hood.

4.Lift the range hood up under cabinet and determine final location by centering beneath cabinet. Mark on the underside of cabinet the location of the 4 keyhole mounting slots on the range hood. Set range hood aside on a covered surface.

A

A. Keyhole slot

5.Use ¹⁄₈" (3 mm) drill bit and drill 4 pilot holes as shown.

A

A. Drill pilot hole

6.Install the 4 - #10 x ⁵⁄₈" mounting screws in pilot holes. Leave about ¹⁄₄" (6.4 cm) space between screw heads and cabinet to slide range hood into place.

¹⁄₄"

(6.4 mm)

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

7.For Direct Wire Installations:

■ Install a UL listed or CSA approved strain relief.

A

A. UL listed or CSA approved strain relief

■Pull about 12" (30.0 cm) of wire through wall or cabinet and into opening.

For Power Supply Installations:

■Follow instructions included with power supply cord kit marked for range hoods.

8.Using 2 people, lift range hood into final position, feeding electrical wire through wiring opening. Position the range hood so that the large end of the keyhole slots are over the screws. Then push the hood toward the wall so that the screws are in the neck of the slots. Tighten mounting screws to cabinet, making sure mounting screws are in narrow neck of slots.

9.Check that damper, if used, rotates up and down freely.

10.For Vented Installations Only:

Connect ventwork to hood. Seal joints with clamps to make secure and airtight.

9

Page 8 Page 10
Page 9
Image 9
Whirlpool RH3736XL installation instructions Install Range Hood, For vented installations, For non-vented installations
Page 8 Page 10

RH3736XL specifications

The Whirlpool RH3736XL is a versatile and efficient refrigerator that embodies the perfect blend of modern design and cutting-edge technology. Designed to meet the needs of contemporary households, this appliance not only provides ample storage but also promotes energy efficiency and convenience through its innovative features.

One of the standout characteristics of the RH3736XL is its spacious interior, which offers a generous capacity that enables users to store a wide variety of food items. The adjustable shelving allows customization of space based on individual preferences, making it easier to store larger items such as tall bottles or bulky containers. In addition to the main compartment, it boasts a dedicated crisper drawer designed specifically for fruits and vegetables, keeping them fresh and preserving their nutritional value.

The refrigerator also incorporates Whirlpool's advanced cooling technologies, which ensure that food items are kept at optimal temperatures. The refrigerator is equipped with an enhanced cooling system that minimizes temperature fluctuations, reducing food spoilage and extending the shelf life of perishable goods. Furthermore, the FreshFlow produce preserver utilizes a special filter to absorb ethylene gas, helping to maintain the freshness of fruits and vegetables longer.

Another notable feature of the RH3736XL is its energy-efficient performance. With an Energy Star certification, this model is designed to consume less energy compared to traditional refrigerators, which not only helps lower electricity bills but also contributes to a more sustainable lifestyle. The eco-friendly design reflects Whirlpool's commitment to energy conservation.

In addition to its functional features, the RH3736XL also focuses on ease of use. The user-friendly control panel is intuitive and allows for easy adjustments of temperature settings. Moreover, the refrigerator features an LED lighting system that illuminates the interior, making it easy to locate items even in low-light conditions.

Finally, the sleek and modern exterior of the Whirlpool RH3736XL complements any kitchen décor. Its stainless-steel finish is both stylish and durable, resistant to fingerprints and easy to clean, ensuring your kitchen appliance remains looking pristine.

In summary, the Whirlpool RH3736XL is a well-rounded refrigerator that brings together functionality, energy efficiency, and modern aesthetics. With its impressive capacity, advanced cooling technologies, and user-friendly design, it is an ideal choice for families and individuals looking to enhance their kitchen experience.
Top Page Image Contents