OFF
Locking screw
Adjusting the oven temperature
control
Does your oven seem hotter or colder
than your old oven? The temperature of
your old oven may have shifted gradu-
ally without you noticing the change.
Your new oven is properly adjusted to
provide accurate temperatures. But
when comparing to your old oven, the
new design may give you different
results.
If after using the oven for a period of
time, you are not satisfied with the tem-
perature settings, they can be adjusted
by following these steps:
1. Pull the Oven Temperature Control
Knob straight off.
2. Loosen the locking screw. Note the
position of the notches.
3. To lower the temperature, move
a notch closer to LO. Each notch
equals about 10°F (5°C).
4. To raise the temperature, move
a notch closer to HI. Each notch
equals about 10°F (5°C).
Tighten the locking screw and
replace the control knob.
Tooth Notches
7