Replacing
,
3.Hold the surface unit as level as possible with the terminal just started into the receptacle.
2.Line up opening in the reflector bowl with the surface unit receptacle.
4.Push the surface unit terminal intc the receptacle. When the terminc is pushed into the receptacle as far as it will go, the surface unit wi fit into the reflector bowl.
CAUTION: Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl gets dlscolored, some of the utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go int6 or around a utensil goes down and heats the reflector bowl. This extra heat can discolor it. See “Cooking Guide” for further information.
I!
