Changing the control
If you need to adjust temperatures in the refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us at
settings
l Adjust the Refrigerator Control first. l Wait at least 24 hours between
adjustments.
l Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator section too warm
Freezer section too warm
Refrigerator section too cold
Ice not made fast enough
Both sections too warm
REASON:
l Door opened often
l Large amount of food added l Room temperature too warm
l Door opened often
l Large amount of food added l Very cold room temperature (can’t cycle often enough)
l Controls not set correctly for your conditions
l Heavy ice usage
l Very cold room temperature (can’t cycle often enough)
l Door opened often
l Large amount of food added
l Very warm or very cold room temperatures
RECOMMENDED CONTROL SETTINGS:
Refrigerator Freezer
4C
3 | A |
2 | 6 |
3 | A |
4 | 6 |
Removing the trivet
(Model RTIQECRE)
To remove the trivet:
1.Lift the front of the trivet out of the supports.
2.Pull the trivet out.
To replace the trivet:
1.Position the back of the trivet on the rear wall supports.
2.Lower the trivet into place.
10
WITH OUESTIONS OR COMMENTS
