Installing it properly
1.Allow 3 inches (7.5 cm) between over- head cabinets and the refrigerator top.
2.Allow at least 1 inch (2.5 cm) between the condenser coils (on back of cabinet) and the back wall.
3.Allow M inch (1.25 cm) on each side of the cabinet for easier installation.
4.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
Leveling it
Your refrigerator has 4 rollers to make positioning the refrigerator easier. Make sure the refrigerator is level for efficient operation.
To level refrigerator:
1.Keep the 4 bolts that held the refrigerator in the shipping crate. They are the leveling legs.
2.Screw these bolts all the way into the bolt holes on the bottom corners of the refrigerator.
3.Adjust each leg so that the refrigerator does not rock.
4.Slide the refrigerator into place.
5.Place a level on top of the refrigerator - first
l Turn a leg clockwise to raise the corner.
l Turn a leg counterclockwise to lower the corner.
6.Check the refrigerator with the level again. Repeat Step 5 until the refrigerator is level.
Leveling leg
\
Raise- | - Lower |
WITH QUESTIONS OR COMMENTS
