Before Using Your
Refrigerator
In This | Section | Page |
|
|
| Page | |
|
|
|
|
|
| ||
Clean | it | .................................................... | ...... 5 | Install | it properly | ...................... | ...... 5 |
Plug | it in .~ | ~ | 5 | Level | it | ~ | 6 |
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to a power source, install it and level it.
Clean it
Clean your refrigerator before using it, if neces- sary. See cleaning instructions on page 12.
Plug it in
Recommended Grounding Method
A 115 Volt AC, 60 Hz., 15 or 20 ampere fused and properly grounded electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.
See Electrical Requirements and Grounding Instructions Sheet in your Literature Package.
Install it properly
1.Allow 3 inches (7.5 cm) between overhead cabinets and refrigerator top.
2.Allow at least 1 inch (2.5 cm) between the refrigerator condenser on the back and the wall.
3.Allow I,4 inch (1.25 cm) on each side of the refrigerator for ease of installation.
4.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
Refrigerator power cord
grounding plug
5
