Whirlpool RTZOCK, RT18EK Changing the contro1, Settings, Adjusting the refrigerator, Shelves

Changing the contro1

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 21.)

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

CONDITION:	REASON:
If Refrigerator	Door	opened	often
Section is	Large	amount	of food added
TOO WARM	Room temperature			too warm
If Freezer	Door	opened	often
Section is	Large	amount	of food added
TOO WARM	Very	cold room temperature
	(can’t	cycle often		enough)

RECOMMENDED CONTROL SETTINGS:

Refrigerator 6

FreezerD

Refrigerator

Freezeri

If Refrigerator	Controls	not set correctly	Refrigerator	i
Section is	for your	conditions	Freezer
TOO COLD

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS

are TOO WARM

Heavy ice usage

Very cold room temperature (can’t cycle often enough)

Door opened often

Large amount of food added Very warm or very cold room temperatures

Refrigerator

Freezeri

Refrigerator 6

FreezerC

Adjusting the refrigerator

Shelves can be adjusted to match the way you use your refrigerator. Glass and wire shelves are strong enough to hold bottles, milk and other heavy food items.

To remove shelves:

1.Remove items from shelf.

2.Tilt shelf up at front.

3.Lift back of shelf.

4.Pull shelf straight out.

To replace shelves:

1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.

2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.

shelves

Glass shelves are heavy. Handle them with care.

9