POTS & PANS

Cycle time includes dry time. An asterisk ( * ) by the cycle time indicates the cycle time might be longer depending on the temperature of the water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle time will be as shown.

POTS & PANS

Use this cycle for hard-to-clean, heavily soiled pots, pans, casseroles, and regular tableware.

Use both detergent dispenser sections.

Wash

Rinse

Main

Purge

Final

Dry

Time

Water

 

 

Wash

 

Rinse

 

(min)

Usage

 

 

 

 

 

 

 

(gal/L)

 

 

 

 

 

 

 

 

88*

9.1/34.4

140°F

 

140°F

 

140°F

 

 

 

(60°C)

 

(60°C)

 

(60°C)

 

 

 

 

 

 

 

 

 

 

 

HEAVY WASH

Use this cycle for heavily soiled loads.

Use both detergent dispenser sections.

Wash

Rinse

Main

Purge

Final

Dry

Time

Water

 

 

Wash

 

Rinse

 

(min)

Usage

 

 

 

 

 

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

72*

6.9/26.1

 

 

 

 

140°F

 

 

 

 

 

 

 

(60°C)

 

 

 

 

 

 

 

 

 

 

 

NORMAL WASH

Use this cycle for loads with normal amounts of food soil. (The energy-usage label is based on this cycle.)

Use covered detergent dispenser section.

Wash

Rinse

Main

Purge

Final

Dry

Time

Water

 

 

Wash

 

Rinse

 

(min)

Usage

 

 

 

 

 

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

 

62*

4.8/18.2

 

 

 

 

140°F

 

 

 

 

 

 

 

(60°C)

 

 

 

 

 

 

 

 

 

 

 

RINSE ONLY

Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away.

Do not use detergent with this cycle.

Wash

Rinse

Main

Purge

Final

Dry

Time

Water

 

 

Wash

 

Rinse

 

(min)

Usage

 

 

 

 

 

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

 

 

 

 

6

2.2/8.3

 

 

 

 

 

 

 

 

A small amount of water runs through the pump to remove soil particles.

Canceling a Cycle

You can cancel a cycle at anytime.

1.Turn the cycle control knob slowly clockwise until you hear water draining. Let the dishwasher drain completely.

2.Open the door.

3.Turn the cycle control knob to Off.

Changing a Cycle or Setting

If your dishwasher has more than one wash cycle, you can change a cycle anytime during a cycle.

1.Lift the door latch to stop the cycle.

2.Press a cycle and, if desired, press an option.

3.Turn the cycle control knob clockwise.

4.Check the detergent dispensers. They must be filled properly for the new cycle.

NOTE: Turning the cycle control knob can cause the covered detergent dispenser section to open and release the detergent. Check the covered section if the cycle uses detergent in both sections.

5.Close the door firmly until it latches. The dishwasher starts a new cycle.

Adding Items During a Cycle

You can add an item anytime before the main wash starts, or the cycle control knob reaches Normal Wash.

To add items

1.Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.

2.Open the door and add the item.

3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. This reduces the amount of moisture escaping from the vent when restarting a cycle.

4.Close the door firmly until it latches. The dishwasher resumes the cycle.

11

Page 11
Image 11
Whirlpool RUD6050R Canceling a Cycle, Changing a Cycle or Setting, Adding Items During a Cycle, Pots & Pans, Heavy Wash