4.(OPTIONAL STEP) Pour measured liquid fabric softener into the liquid fabric softener dispenser. Softener is added automatically during the rinse portion of the cycle.
■Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the crossbar in the opening.
■Do not spill or drip any fabric softener on the clothes.
■Use only liquid fabric softener in this dispenser.
5.Close the washer lid.
6.Turn the LOAD SIZE selector to the correct setting for your wash load and the type of fabric being washed.
■Choose a load size that allows the load to move freely for best fabric care. See "Loading".
■You may change the load size selection after the washer has started filling by turning the selector to a different setting.
.
7.Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed.
■Use the warmest water safe for fabric.
■Follow garment label instructions.
HOT: 111°F (44°C) or above
–Whites and pastels
–Heavy and greasy soils
WARM: 90° to 110°F (32° to 43°C)
–Bright colors
–Moderate to light soils
COLD: 70° to 90°F (21° to 32°C)
–Colors that bleed or fade
–Light soils
8.(OPTIONAL STEP) For an additional rinse and spin at the end of a wash cycle, set the EXTRA RINSE selector to ON.
9.(OPTIONAL STEP) Set the CYCLE SIGNAL selector to ON if you want your washer to sound a signal when the wash cycle is finished. The signal is helpful when you are washing items that should be removed from the washer as soon as the cycle ends.
10.Push in the Cycle Control knob and turn it clockwise to the wash cycle you want. Reduce the wash time when using a small load size setting. See “Selecting a Cycle and Time.”
11.Pull out the Cycle Control knob to start the washer.
NOTE: To stop the washer at any time, push in the Cycle Control knob. To restart the washer, close the lid (if open) and pull out the Cycle Control knob.
7
