![](/images/new-backgrounds/1084014/840149x1.webp)
Using your cooktop
RIGHT REAR
CONTROL KNOB
LEFT REAR
CONTROL KNOB
RIGHT FRONT
CONTROL KNOB
Using the Surface Burners
This cooktop is equipped with either standing pilots or electronic ignitors. Standing pilots must be lit initially with a match following the directions on page 6. The pilot light will remain lit when the burners are turned off. To turn a burner on again, just push in and turn the control knob to LIGHT and the burner will light. Electronic
ignitors automatically light the burners each time they are used.
I
Control knobs must be pushed in,
then turned to the LIGHT position. On electronic ignitor model, the clicking sound is the ignitor sparking.
After the burner lights, turn the control knob back to a desired setting. The control knob can be set anywhere between HI and low setting. Do not cook wlth the control In the LIGHT posltton.
Prolonged Power Failure
Surface burners with electronic igni- tors can be manually lighted. Hold a lit match near a burner and turn the control to the LtGHT position. After the burner lights, turn the control to the