Changing cooktop modules
Make sure all controls are OFF and the cooktop parts are cool before removing them.
Surface burner | modules |
|
|
Surface burner module | will work on either side of the cooktop. | Or,,,cet | Venturi |
|
|
|
\
1. To remove, | liftzff | 2. Lift slightly | the |
surface grates. | handle. |
| |
1. To replace, | line | 2. | Push | the | module | |
up | the venturi |
| until | it’s | seated | |
with | the | burner |
| properly. |
| |
orifices. |
| 3. | Lower | front with | ||
Grill | module |
| the handle. |
| ||
|
|
|
| |||
3.With both hands,
pull module to- ward you to clear orifices. Lift out.
4. Install “surface grates.
Grill module will work on the right side of the cooktop only. A
1.To remove, lift off grills.
2.Lift front end of burner pan and pull toward you.
3.With both hands, - 4. Lift out the grease
lift | burner pan out | pan, being | care- |
and | set aside. | ful not to | spill fat |
|
| drippings. |
|
1.To replace, insert the grease pan. Do not use the grill module unless the
grease pan is in
8 place.
2.Line up the venturi
with | the burner | place | while | low- | burners. |
orifices. | ering | burner | pan. |
| |
All grill parts must be cleaned after each use to avoid excessive smoke,
