Whirlpool SES380MS0 Electronic Oven Control, Oven Indicator Lights, Display, Start/Enter, Clock

Models: SES380MS0

1 20
Download 20 pages 723 b
Page 9
Image 9
ELECTRONIC OVEN

ELECTRONIC OVEN

CONTROL

1

2

3

4

5

6

 

11

10

9

8

7

 

1.

Display

 

 

 

6.

Off/Cancel

2.

Clock

 

 

 

7.

Temperature/Time

3.

Timer Cancel*

 

 

8.

Cook Time

4.

Start/Enter (Control Lock)

9.

Start Time

5.

Auto Clean

 

 

10.

Custom Broil

 

 

 

 

 

11.

Bake

Oven Indicator Lights

The indicator lights are located to the left of, and within the display. The indicator lights light up or flash when the oven is in one of the following modes: BAKE, BROIL, START?, ON, TIMER, COOK TIME/TIMED cooking (on some models), and START TIME/DELAY cooking (on some models).

Display

When power is first supplied to the appliance, “PF” will appear on the display. Press OFF/CANCEL to clear.

If “PF” appears at any other time, a power failure has occurred. Press OFF/CANCEL and reset the clock if needed.

When the oven is in use, the display shows preheat time and the temperature and oven setting. When the oven is not in use, the display shows the time of day.

When using START TIME/COOK TIME the display will show either hours and minutes, or minutes and seconds.

When setting a function, if START/ENTER is not pressed, and after 5 seconds, the “START?” oven indicator light will flash. Press START/ENTER, or after 5 minutes, the set function will be canceled.

Start/Enter

The START/ENTER pad begins any oven function. On some models, if pad is not pressed within 5 seconds after pressing a function pad, the “START?” indicator light will flash as a reminder. On some models, “START?” will appear on the display.

If not pressed within 5 minutes after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be canceled.

Off/Cancel

The OFF/CANCEL pad stops any function except the Clock, Timer and Control Lock.

Clock

This is a 12-hour clock and does not show a.m. or p.m.

To Set:

Before setting, make sure the oven and Timer are off.

1.Press CLOCK.

2.Press the TEMP/TIME “up” or “down” arrow pad to set the time of day.

3.Press START/ENTER or CLOCK.

Timer

The Timer can be set in hours or minutes up to 12 hours and 59 minutes and counts down the set time. The Timer does not start or stop the oven.

To Set:

1.Press TIMER CANCEL*.

The timer oven indicator light will light up.

2.Press the TEMP/TIME “up” or “down” arrow pad to set the length of time.

3.Press START/ENTER.

When the set time ends, four 1-second tones will sound.

4.Press TIMER CANCEL* anytime to cancel the timer and/or stop reminder tones.

To cancel the timer during the countdown, press TIMER CANCEL* twice.

The time can be reset during the countdown by repeating the above steps.

To display the time of day when the timer is counting down, press

CLOCK.

Control Lock

The Control Lock shuts down the control panel pads to prevent unintended use of the oven. When the control is locked, only the CLOCK and TIMER pads will function.

To Lock/Unlock Control: Before locking, make sure the oven and Timer are off. Touch and hold START/ENTER for 5 seconds.

Asingle tone will sound, “LOC” and “LOCK’D” (on some models) will appear on the display. “LOC” will also appear whenever any command pad is pressed while the control is locked.

Repeat to unlock. “LOC” and “LOCK’D” (on some models) will disappear from the display.

9

Page 9
Image 9
Whirlpool SES380MS0 Electronic Oven Control, Oven Indicator Lights, Display, Start/Enter, Off/Cancel, Clock, Timer, To Set