Whirlpool 8SF302PSY, SF302BSA/BEA, SF304BSA warranty Removing the oven door, To remove, To replace

Models: 8SF302PSY SF304BSA SF302BSA/BEA

1 28
Download 28 pages 21.89 Kb
Page 20
Image 20
Removing the oven door

Removing the oven door

Removing the oven door will help make it easier to clean the oven.

Burn and Electrical Shock Hazard

Make sure all controls are OFF and the oven is cool before removing oven door.

Failure to do so could result in burns or electrical shock.

To remove:

1.Open the door as far as it will go.

2.Remove the screws on each side of the oven door.

3.Close the door about % of the way.

4.Lift the door up and off the hinges.

To replace:

1.Be sure the hinge arms are in the open position. Be careful if pulling the hinges open by hand. Hinges may snap back against the oven frame and could pinch fingers.

2.Hold the door at the sides near the top. Insert hinge arms into slots at the bottom of the door. Insert arms evenly, as far as they will go.

3.If the door is not in line with the oven frame, remove it and repeat the above steps.

4.Replace the screws on the oven door.

-.1--_,.’ --,/,.jJQ /-,..::::..‘~c:;‘~;~,.@0Screw-- a/ -7

20

Page 20
Image 20
Whirlpool 8SF302PSY, SF302BSA/BEA, SF304BSA warranty Removing the oven door, To remove, To replace