Whirlpool SF304BSA, 8SF302PSY Using Your Range, burners, surface, In This, Surface burner markers

Using Your Range

In This	Section
			Page
Using the	surface	burners	.......7
Positioning	racks	and pans	.......9
For best	air circulation		.....10
Lighting	standing	pilots	.....11
Baking/roasting ..		.....#	12

					Page
Adjusting		the	oven	temperature
control			....I		13
Broiling				s.........m	....14
Energy saving			tips	.........m	....15
The	oven	vent ..,...,.........,			15
The	anti-tip	brackets			....16

To obtain the best cooking results possible, you must operate your range properly. This section gives you important information for efficient and safe use 01 your range.

Using	the	surface	burners
Your range	is equipped with either standing			Push in and turn
pilots or electric ignitors. Standing pilots
must be lit initially with a match following the
directions on page 11. The pilot light will
remain lit when the burners are turned off.
To turn a burner on again, just push in and
turn the control knob counterclockwise			to
LITE and the burner will light. Electric
ignitors automatically light the burners each
time the control knob is turned to LITE.
Push in the control knob and turn
counterclockwise		to the LITE position. On
electric ignitor models, the clicking sound is
the ignitor sparking. Visually check that
burner has	lit.

After the burner lights, turn the control knob to the desired setting. You can set the control knob anywhere between HI and LO.

Surface burner markers

The solid dot in the surface burner marker shows which surface burner is turned on by that knob.

Burner heat settings

Use correct burner heat settings (see next page). If the heat setting is too high, it can: l Char bacon and cause curling.

l Make eggs tough and crisp at the edges. l Toughen liver, fish and seafood.

l Scorch delicate sauces and custards. l Cause a boilover.

7