Lighting Standing Pilots

To light Cooktop Pilots:

II

1. Make sure all controls are OFF.

2.Remove the grates and reflector pans from cooktop. Lift the cook- top and rest on support rod.

3.To Ilght, hold a lit match over the pilot light located between the front and back burners. The pilot flame should be Ydto J/ain (.6X-.953 cm) high.

4.If the pilot flame needs adjust- ment, turn the pilot adjustment screw on the manifold pipe.

5.Lower the cooktop and replace the grates before using the sur- face burners.

To light Oven Burner Pilot:

1. Make sure the oven control is OFF.

2.Remove the broiler drawer. Slide drawer out to stops, lift both sides, then slide the rest of the way out.

3.Hold a lit match over the oven burner pilot located at the rear of the burner.

4.After the oven burner pilot is burn- ing steady. check burner lighting by turning the Oven Control to a temperature abovel4O”F (60°C). The burner will take 50-60 seconds to light.

5.Replace the broiler drawer.

11

Page 11
Image 11
Whirlpool SF335ESR/ER, SF315ESR/ER manual Lighting Standing Pilots, To light Cooktop Pilots, To light Oven Burner Pilot