Selecting a wash temperature

Your washer selects a wash water temperature

 

and time when you select a wash cycle (see

Wuh watm tmpyture

“Selecting a cycle and time” on page 7).

 

Match the wash water temperature to the type

 

of fabric and soils being washed. All rinses are

 

cold.

 

For hot waeh water, turn the Cyde Control Knob

 

to Heavy, 14 minutes wash time.

 

For warm wash water, turn the Cycle Control

 

Knob to Regular, 10 minutes wash time: or Short,

 

6 minutes wash time.

 

For cold wash water, turn the Cycle Control

 

Knob to Normal, 6 minutes wash time; or Short, 2

 

minutes wash time.

 

You may select diierent wash times by first

 

selecting the water temperature and then turning

 

to the new wash time. For example, if you desire

 

14 minutes wash time with cold water:

 

1. Push in the Cycle Control Knob and turn it

 

clockwise to Normal-6 (cold wash water).

 

2. Pull out the Cycle Control Knob and allow your

 

washer to fill.

 

3. When your washer has filled, push in and turn

 

the Cycle Control Knob clockwise to Heavy-14.

 

(Your washer may add a small amount of

 

additional warm water, but this should not

 

affect the overall desired wash water tempera-

 

ture.)

 

4. Pull out the Cycle Control Knob.

 

Water temperature tips

-Use warm or hot wash water with permanent press fabrics.

-For heavily soiled permanent press or knit clothes, pre-wash or pre-soak in warm water before washing.

See the ‘Water usage guide’ on page 14 for more information.

6

Page 6
Image 6
Whirlpool TAWMZOOB warranty Selecting a wash temperature, Water temperature tips, Selecting a cycle and time on