Whirlpool TT18HK warranty Changing the control, Settings, Adjusting the refrigerator shelves

Changing the control

If you need to adjust temperatures in refrig- erator or freezer, use the settings listed in the chart below as a guide. If you have ques- tions, call our Consumer Assistance Center number. (See page 19.)

settings

l Adjust the Refrigerator Control first.

. Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

						RECOMMENDED
CONDITION:	REASON:					CONTROL SElTINGS:
If Refrigerator	Door	opened often				Refrigerator	6
Section is	Large amount of food added					Freezer	D
TOO WARM	Room	temperature			too warm
If Freezer	Door	opened		often		Refrigerator	:
Section is	Large	amount		of food added		Freezer
TOO WARM	Very	cold room temperature
	(can’t	cycle often			enough)
If Refrigerator	Controls		not	set correctly		Refrigerator	2
Section is	for your		conditions			Freezer	A
TOO COLD

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS

are TOO WARM

Heavy ice		usage		Refrigerator	i
Very	cold	room temperature		Freezer
(can’t	cycle often enough)
Door	opened		often	Refrigerator	:
Large	amount		of food added	Freezer

Very warm or very cold room temperatures

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use your refrigerator.

To remove glass shelves:

1.Remove items from shelf.

2.Tilt shelf up at front.

3.Lift back of shelf.

4.Pull shelf straight out.

To replace glass shelves:

1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.

2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.