IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

■Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

■Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

■Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

■Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.

■Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

■When cutting or drilling into wall or ceiling; do not damage electrical wiring and other utilities.

■Ducted fans must always be vented outdoors.

CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. CAUTION: To reduce risk of fire and to properly exhaust air, be sure to duct air outside - do not vent exhaust air into spaces within walls or ceilings, attics or into crawl spaces, or garages.

WARNING: TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

WARNING: TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

■Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

■Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).

■Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

■Use proper pan size. Always use cookware appropriate for the size of the surface element.

WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:a

■SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

■NEVER PICK UP A FLAMING PAN - you may be burned.

■DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result.

■Use an extinguisher ONLY if:

–You know you have a class ABC extinguisher, and you already know how to operate it.

–The fire is small and contained in the area where it started.

–The fire department is being called.

–You can fight the fire with your back to an exit.

aBased on "Kitchen Fire Safety Tips" published by NFPA.

■WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device.

READ AND SAVE THESE INSTRUCTIONS

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10400320B, UXT2036AY, UXT2030AY, LI3Z2A installation instructions Important Safety Instructions
Page 2 Page 4

UXT2030AY, UXT2036AY, LI3Z2A, W10400320B specifications

The Whirlpool LI3Z2A, UXT2036AY, UXT2030AY, and W10400320B represent a notable lineup of kitchen appliances designed to enhance cooking experiences with their innovative features, technologies, and sleek designs.

The Whirlpool LI3Z2A refrigerator is particularly noteworthy for its spacious interior and efficient organization. With ample storage options, including adjustable shelves and dedicated compartments, it ensures that groceries remain accessible and fresh. It also boasts an Energy Star rating, underscoring its efficiency and eco-friendliness.

One of the standout features of the LI3Z2A is its advanced cooling technology, which maintains optimal temperatures and humidity levels to prolong the freshness of perishable items. Additionally, the model is equipped with a user-friendly interface, allowing users to adjust settings easily to suit their preferences.

On the other hand, the UXT2036AY and UXT2030AY are under-cabinet range hoods that excel in providing the necessary ventilation for modern kitchens. Both models have sleek designs that blend seamlessly with various kitchen styles. The UXT2036AY offers enhanced exhaust performance with a 300 CFM blower that efficiently eliminates smoke, odors, and moisture while cooking. It utilizes multi-speed fan settings, allowing users to customize ventilation based on their cooking needs.

Similarly, the UXT2030AY model features a compact design without compromising on functionality. It is equipped with a quiet yet powerful blower that operates quietly, minimizing disruption in the kitchen. Both range hoods come with dishwasher-safe grease filters, making maintenance a breeze while ensuring the kitchen remains clean and fresh.

Lastly, the W10400320B is an essential appliance in the Whirlpool ecosystem, serving as a replacement part for various models. This component exemplifies Whirlpool's commitment to providing long-lasting, reliable products that enhance the overall kitchen experience.

In summary, the Whirlpool LI3Z2A, UXT2036AY, UXT2030AY, and W10400320B showcase the brand's dedication to innovation, efficiency, and design. With their focus on user convenience and performance, these appliances are ideal choices for anyone looking to elevate their culinary space while promoting a functional and stylish kitchen environment.
Top Page Image Contents