Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool. | 3. | Screw light bulb into socket. | |||
1. | Disconnect power. |
| 4. | Replace lens cover by squeezing cover and inserting tabs | |
2. | Squeeze the plastic lens cover and remove it from the hood. |
| into slots. | ||
5. | Reconnect power. | ||||
| A | B | |||
| If new light does not operate, make sure the lamp is inserted | ||||
|
| ||||
|
|
| |||
|
|
| correctly before calling service. | ||
A. Light bulb socket
B. Lens cover
WIRING DIAGRAM
SE116B | Light Switch | Motor Switch |
On - Off | Low - Off - High |
BK
W
Motor Characteristics
Power Supply |
| 120 VAC | |
Frequency |
| 60 Hz | |
Amperage |
| 0.9 ±10% A | |
Wattage Rating |
| 50 ±10% Watts | |
Motor Resistance | |||
White - Red |
| 22.3 ±10% Ohms | |
White - Black |
| 13.4 ±10% Ohms | |
BK
BR | BK | R | |
|
|
|
|
| BR | W | R |
| Speed 2 | Common | Speed 1 |
| BK | W | R |
W | W |
| BK |
| C19 |
N | L |
Ground Screw
GND
12
