ELECTRONIC OVEN CONTROL
AB C D E F
K | J | I | H | G |
A. Oven display |
| G. Temperature/time | ||
B. Clock |
|
| H. Cook time | |
C. Timer/cancel |
| I. Start time | ||
D. Start/enter (control lock) | J. Custom broil | |||
E. Auto clean |
|
| K. Bake | |
F. Off/cancel |
|
|
| |
Oven Indicator Lights
The indicator lights are located along all 4 sides of the display. The indicator lights light up or flash when the oven is in one of the following modes: Bake, Broil, Clean (on some models), On, Start?, Controls Locked, Door Locked (on some models), Delay, Timer, Temp, Cook Time, or Start Time.
Display
When power is first supplied to the appliance, “PF” or a flashing time will appear on the display. Press OFF/CANCEL to clear.
If “PF” or a flashing time appears at any other time, a power failure has occurred. Press OFF/CANCEL and reset the clock if needed.
When the oven is in use, the display shows preheat time or oven temperature setting.
When the oven is not in use, the display shows the time of day.
When using Start Time/Cook Time, the display will show either hours and minutes, or minutes and seconds.
If Start/Enter is not pressed after setting a function, the “Start?” oven indicator light will begin flashing after 5 seconds.
Start/Enter
The Start/Enter pad begins any oven function. If the Start/Enter pad is not pressed within 5 seconds after pressing a function pad, the “Start?” indicator light will flash as a reminder.
If Start/Enter is not pressed within 1 minute after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be canceled.
Off/Cancel
The Off/Cancel pad stops any function except the Clock, Timer and Control Lock.
The cooling fan may continue to operate after an oven function has been canceled, depending on oven temperature.
Clock
This is a
To Set:
Before setting, make sure the oven and Timer are off.
1.Press CLOCK.
2.Press the TEMP/TIME “up” or “down” arrow pad to set the time of day.
3.Press START/ENTER or CLOCK.
Tones
Tones are audible signals, indicating the following:
One tone
■Valid pad press
■Oven is preheated (long tone)
■Function has been entered
■Reminder, repeating each minute after the
Three tones
■Invalid pad press
Four tones
■End of cycle
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to Celsius on some models.
To Change: Press and hold CUSTOM BROIL for 5 seconds. A tone will sound, and “°C” will appear on the display. Repeat to change back to Fahrenheit. To exit mode, press OFF/CANCEL.
8
