■In a Manual Cycle, if a wet item is not detected within
5 minutes, the Sensing light will turn off and the Damp light will turn on.
Wet
The WET light will turn on when a wet item has been detected in the dryer. The Wet light will remain on until:
■The damp dry point is reached in an Auto or Manual Cycle.
Damp
The DAMP light indicates that the load has reached the damp dry level.
Cool Down
The COOL DOWN light illuminates during the cool down part of the cycle. Laundry is cooling down for ease in handling.
Cycle Complete
This light illuminates when a drying cycle is finished. If the WRINKLE SHIELD™ feature has been selected, the WRINKLE SHIELD™ feature indicator light will also be illuminated.
The Cycle Complete light turns off 1 hour after the end of a drying cycle (including the WRINKLE SHIELD™ cycle of 90 minutes), when Pause/Cancel is pressed, or when the door is opened.
WRINKLE SHIELD™ Feature
The WRINKLE SHIELD™ feature light illuminates when this option is selected. This indicator stays on with the Cycle Complete light.
Indicator lights
Other indicator lights on the control panel show when Cycle, Temp Adjust, and End of Cycle settings are selected.
Cycles
Select the drying cycle that matches the type of load you are drying. See Auto Preset or Manual Preset Cycle Settings charts.
Cycle control knob
AUTOCYCLES
Auto Cycles allow you to match the cycle to the load you are drying. See the following Auto Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying.
Heavy Duty
Use this cycle to get High heat for heavyweight mixed loads, cotton towels or jeans.
Normal
Use this cycle to get Medium heat for drying mixed loads and sturdy fabrics such as work clothes.
Casual
Use this cycle to get Low heat for drying
Delicate
Use this cycle to get Low heat for drying synthetic fabrics, washable knit fabrics and
Super Delicate
Use this cycle to get Extra Low heat to gently dry items such as lingerie, exercise wear or sheer curtains.
Damp Dry
Use this cycle to dry items to a damp level using Low heat, or to dry items that do not require an entire drying cycle. Damp dry items such as jeans (to avoid stiffness) or cotton clothing (to make ironing easier). The temperature setting on this cycle cannot be adjusted. Items will have different levels of dampness. At the end of this cycle, clothes will be damp.
Auto Preset Cycle Settings
Auto Cycles | Temp. | Time* |
Load Type |
| (Minutes) |
|
|
|
HEAVY DUTY | High | 40 |
Heavyweight mixed loads, |
|
|
cotton towels, jeans |
|
|
|
|
|
NORMAL | Medium | 35 |
Mixed loads, corduroys, work |
|
|
clothes, sheets |
|
|
|
|
|
CASUAL | Low | 35 |
Permanent press, synthetics |
|
|
|
|
|
DELICATE | Low | 30 |
Lightweight items, blouses, |
|
|
synthetics |
|
|
|
|
|
SUPER DELICATE | Extra Low | 25 |
Lingerie |
|
|
|
|
|
DAMP DRY | Low | 20 |
Clothes to come out suitable |
|
|
for ironing |
|
|
|
|
|
*Estimated Time with Auto DRYNESS (Normal) setting.
Time will vary depending on load type and load size.
MANUALCYCLES
Use Manual Cycles to select a specific amount of drying time and a drying temperature. When a Manual Cycle is selected, the ESTIMATED TIME REMAINING display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing TIMING Up or Down.
Timed Dry
Use this cycle to complete drying if items are still damp after an Auto Cycle. Timed Dry is also useful for drying heavyweight and bulky items such as bedspreads and work clothes.
Quick Dry
Use this cycle for drying small loads or loads that need a short drying time.
Touch Up
Use this setting to help smooth out wrinkles from such items as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.
17
