Connect Drain Hose

Proper connection of the drain hose protects your floors from damage due to water leakage. Read and follow these instructions.

The drain hose is connected to your washer and is stored inside the washer cabinet.

Remove drain hose from washer cabinet

Gently pull the corrugated drain hose out of the washer from the top of the hose. Continue to pull the hose until the end emerges. Do not force excess drain hose back into the rear of the washer.

Laundry tub drain or standpipe drain

Connect the Inlet Hoses

The washer must be connected to the water faucets using new inlet hoses (not provided). Do not use old hoses.

Insert new flat washers into each end of the inlet hoses. Firmly seat the washers in the couplings.

AB

A.Coupling

B.Washer

Connect the inlet hoses to the water faucets

Make sure the washer basket is empty.

1.Attach hose to the hot water faucet. Screw on coupling by hand until it is seated on the washer.

2.Attach hose to the cold water faucet. Screw on coupling by hand until it is seated on the washer.

3.Using pliers, tighten the couplings with an additional two-thirds turn.

Connecting the drain hose form to the corrugated drain hose

A

A. Drain hose reliefs

1.Feed end of drain hose into one end of form. Place end of drain hose form into the drain hose relief.

2.Bend the hose over the top of the form and feed into the other end of the form.

To keep drain water from going back into the washer:

Do not force excess drain hose into standpipe. Hose should be secure but loose enough to provide a gap for air.

Do not lay excess hose on the bottom of the laundry tub.

Floor drain

Do not install the drain hose form on to the corrugated drain hose. You may need additional parts. See Floor drain under “Tools and Parts.”

Tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Clear the water lines

Run water through both faucets and inlet hoses, into a laundry tub, drainpipe or bucket, to get rid of particles in the water lines that might clog the inlet valve screens.

Check the temperature of the water to make sure that the hot water hose is connected to the hot water faucet and that the cold water hose is connected to the cold water faucet.

6

Page 6
Image 6
Whirlpool W10112488 Connect Drain Hose, Connect the Inlet Hoses, To keep drain water from going back into the washer

W10112488 specifications

The Whirlpool W10112488 is a highly efficient and versatile appliance that has carved a niche for itself in the competitive world of kitchen gadgets. Designed primarily as a water filter, it boasts an impressive array of features and technologies, making it an essential addition to any home seeking cleaner and better-tasting drinking water.

One of the standout features of the W10112488 is its advanced filtration system. It utilizes a multi-stage filtration process to remove contaminants and impurities commonly found in tap water, such as chlorine, sediment, and rust. This ensures that the water you drink is not only safe but also tastes great. The filter has been certified to reduce harmful substances, giving owners peace of mind regarding their family's health and well-being.

The design of the W10112488 is another notable aspect. It is compact and lightweight, making it easy to install and replace on various refrigerator models. Its compatibility with multiple Whirlpool refrigerator models adds to its appeal, allowing users to enhance their existing appliances without hassle. Moreover, installation typically does not require any specialized tools, further simplifying the process for consumers.

In terms of longevity, the W10112488 filter has a significant lifespan. Depending on usage, it can last up to six months before needing replacement. This extended usage period not only ensures that users get optimal performance but also makes it a cost-effective solution for families concerned about ongoing expenses related to water filtration.

The filter's performance is also backed by innovative technologies. Whirlpool has engineered it to use a high-capacity design that maximizes the filter's effectiveness while maintaining a steady flow of water. This means users won't have to sacrifice convenience for quality. Whether it’s for brewing coffee, cooking, or direct consumption, the W10112488 delivers filtered water effortlessly.

Finally, eco-conscious consumers will appreciate Whirlpool's commitment to sustainability. By using this filter, households can reduce their reliance on bottled water, thus contributing to a significant reduction in plastic waste and benefiting the environment.

In summary, the Whirlpool W10112488 water filter combines advanced filtration technology, user-friendly design, longevity, and eco-friendliness, making it a smart choice for anyone looking to improve their home's water quality. With its features and efficiency, it stands as a testament to Whirlpool's dedication to consumer satisfaction and environmental responsibility.