Connect the inlet hoses to the washer

A

B

A. Cold water inlet valve

B. Hot water inlet valve

1.Attach the hot water hose to the bottom inlet valve.

2.Attaching the hot water coupling first makes it easier to tighten connection with pliers.

3.Screw on coupling by hand until it is seated on the washer.

4.Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

5.Attach the cold water hose to the top inlet valve.

6.Screw on coupling by hand until it is seated on the washer.

7.Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Check for leaks

Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this later.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.

■If you connect only one water hose, you must cap off the remaining water inlet port.

■Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Secure the Drain Hose

1.Remove the shipping material from the power cord. Drape the power cord over the console.

2.Remove any cardboard used to move washer.

Beaded tie strap

3.Wrap the drain hose to the laundry tub leg, drain standpipe or inlet hoses, with the beaded tie strap. Push fastener into the nearest hole in the beaded tie strap. See view A or B.

ABC

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the drain hose. See view C.

Level the Washer

Properly leveling your washer avoids excessive noise and vibration.

Install the Front Leveling Feet

1.Prop up the front of the washer about 4" (10.2 cm) with a wood block or similar object. The block needs to support the weight of the washer.

A

4"

(10.2 cm)

A. Threaded holes for feet

7

Page 6 Page 8
Page 7
Image 7
Whirlpool W10112488 Secure the Drain Hose, Level the Washer, Check for leaks, Connect the inlet hoses to the washer
Page 6 Page 8

W10112488 specifications

The Whirlpool W10112488 is a highly efficient and versatile appliance that has carved a niche for itself in the competitive world of kitchen gadgets. Designed primarily as a water filter, it boasts an impressive array of features and technologies, making it an essential addition to any home seeking cleaner and better-tasting drinking water.

One of the standout features of the W10112488 is its advanced filtration system. It utilizes a multi-stage filtration process to remove contaminants and impurities commonly found in tap water, such as chlorine, sediment, and rust. This ensures that the water you drink is not only safe but also tastes great. The filter has been certified to reduce harmful substances, giving owners peace of mind regarding their family's health and well-being.

The design of the W10112488 is another notable aspect. It is compact and lightweight, making it easy to install and replace on various refrigerator models. Its compatibility with multiple Whirlpool refrigerator models adds to its appeal, allowing users to enhance their existing appliances without hassle. Moreover, installation typically does not require any specialized tools, further simplifying the process for consumers.

In terms of longevity, the W10112488 filter has a significant lifespan. Depending on usage, it can last up to six months before needing replacement. This extended usage period not only ensures that users get optimal performance but also makes it a cost-effective solution for families concerned about ongoing expenses related to water filtration.

The filter's performance is also backed by innovative technologies. Whirlpool has engineered it to use a high-capacity design that maximizes the filter's effectiveness while maintaining a steady flow of water. This means users won't have to sacrifice convenience for quality. Whether it’s for brewing coffee, cooking, or direct consumption, the W10112488 delivers filtered water effortlessly.

Finally, eco-conscious consumers will appreciate Whirlpool's commitment to sustainability. By using this filter, households can reduce their reliance on bottled water, thus contributing to a significant reduction in plastic waste and benefiting the environment.

In summary, the Whirlpool W10112488 water filter combines advanced filtration technology, user-friendly design, longevity, and eco-friendliness, making it a smart choice for anyone looking to improve their home's water quality. With its features and efficiency, it stands as a testament to Whirlpool's dedication to consumer satisfaction and environmental responsibility.
Top Page Image Contents