4
INSTALLATION INSTRUCTIONS

Tool s a nd Pa rt s

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.

Parts supplied

Remove parts package from dryer drum. Check that all parts are
included.
NOTE: Do not use leveling legs supplied with dryer if installing on
a pedestal.

Parts needed

Check local codes and with gas supplier. Check existing gas
supply, electrical supply and venting. Read “Electrical
Requirements,” “Gas Supply Requirements” and “Venting
Requirements” before purchasing parts.
■For close-clearance installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see “Plan Vent System” section for
venting requirements.
Mobile home installations require special parts (listed following)
that may be ordered by calling the dealer from whom you
purchased your dryer. For further information, please refer to the
“Assistance or Service” section.
■Mobile Home Installation Kit. Ask for Part Number 346764.
■Metal exhaust system hardware.

Options

Pedestal

Are you placing the dryer on a pedestal? You have the option of
purchasing pedestals of different heights separately for this dryer.
You may select a 10" (25.4cm) or 15.5" (39.4 cm) pedestal.
These pedestals will add to the total height of the dryer for a total
height of approximately 48" (121.9cm) or 53.5" (135.9 cm),
respectively.
For a garage installation, you will need to place the 10" (25.4 cm)
pedestal at least 9" (22.9 cm) above the floor and the
15.5" (39.4 cm) pedestal at least 3.5" (8.9 cm) above the floor.
The pedestals are available in several colors.
To order, call the dealer from whom you purchased your dryer or
refer to the “Assistance or Service” section.

Stack Kit

Are you planning to stack your DUET® washer and dryer? To do
so, you will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the “Assistance or Service” section. Ask for Part Number
8541503.
■8" or 10" pipe wrench
■8" or 10" adjustable
wrench (for gas
connections)
■Flat-blade screwdriver
■Adjustable wrench that
opens to 1" (2.5 cm) or
hex-head socket wrench
(for adjusting dryer feet)
■¹⁄₄" nut driver or socket
wrench
■Level
■Knife
■Vent cl amps
■Pipe-joint compound
resistant to L P gas
■Caulking gun and
compound (for installing
new exhaust vent)
■Pliers
■Tape measure
A.Leveling legs (4)
B.“Y” connector
C.Short inlet hose
D.Inlet hose with right-angle connector
E.Rubber washer
ABCDE
37"
(93.98 cm)
A.10" (25.4 cm) pedestal
B.15.5" (39.4 cm) pedestal
Pedestal Height Color Part Number
10" (25.4 cm) White WHP1000SQ
10" (25.4 cm) Diamond Dust
(Silver) WHP1000SU
10" (25.4 cm) Black WHP1000SB
15.5" (39.4 cm) White WHP1500SQ
15.5" (39.4 cm) Diamond Dust
(Silver) WHP1500SU
15.5" (39.4 cm) Black WHP1500SB
15.5" (39.4 cm) New Aspen WHP1500SA
15.5" (39.4 cm) Tuscan Chestnut WHP1500SC
AB