LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

NOTES:

■It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

■Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54"

(137.16 cm) is recommended.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10162458A, W10162459A LocationRequirements, Electrical Requirements, Water Supply Requirements, Tools Needed
Page 2 Page 4

W10162458A, W10162459A specifications

The Whirlpool W10162459A and W10162458A are essential accessories for enhancing kitchen operations, particularly in Whirlpool kitchen appliances. These models cater primarily to the need for improved filtration and performance, ensuring that appliances work efficiently while providing cleaner, healthier results.

One of the standout features of these models is their advanced filtration technology, which effectively removes unwanted contaminants from water. Users can expect a significant reduction in impurities, which contributes to improved taste and quality of water and ice produced by refrigerators. This technology is vital for consumers who are health-conscious and prefer fresh water free from chlorine and other undesirable chemicals.

The W10162459A and W10162458A models are designed for easy installation, ensuring that even those without technical expertise can replace their old filters with these new units. The process is straightforward due to the user-friendly design, which aligns perfectly with Whirlpool appliances, making maintenance a hassle-free experience. This characteristic emphasizes convenience, catering to busy individuals and families who rely on their kitchen appliances for daily functioning.

Durability is another key characteristic of these filters. Constructed with high-quality materials, they are built to last and maintain performance over extended periods. The replaced filters not only promise efficiency but also reduce the frequency of replacements, saving consumers both time and money in the long run.

In terms of compatibility, the W10162459A and W10162458A are designed to fit a range of Whirlpool refrigerator models. This versatility makes them a popular choice among consumers with different appliance models, ensuring that users are not limited by specific models or brands when looking for replacement filters.

Moreover, the filters meet or exceed industry standards for water filtration, instilling confidence in users about the safety and quality of their drinking water. The technology within these models assures users that they are making a smart choice for their health and well-being.

In summary, the Whirlpool W10162459A and W10162458A filters offer a combination of advanced filtration technology, easy installation, durability, compatibility, and adherence to safety standards. These features make them indispensable accessories for anyone looking to enhance their kitchen experience, ensuring that their appliances operate optimally while providing fresh, clean water.
Top Page Image Contents