HP Scanner Tools Utility
Use the HP Scanner Tools Utility to:
●Configure the list of scan profiles on the scanner front panel
●Create scan profiles that use
●Set maintenance and status update notification options
●Change the scanner's power management settings
●View scanner information (firmware version, serial number, total number of pages scanned)
To open the utility, do one of the following:
●Press the Tools (
) button.
●Windows XP, Vista, Windows 7:
●Windows 8: On the Start screen, click the HP Scanner Tools Utility tile.
●Click Start, point to Programs or All Programs, point to HP, point to Scanjet, point to 5000 s2, and then click Scanner Tools Utility.
For more information, see the HP Scanner Tools Utility Help.
HP TWAIN
HP TWAIN allows you to scan using
ISIS
ISIS (Image and Scanner Interface Specification) provides a software interface between imaging/scanning hardware and software applications. ISIS drivers provide a consistent interaction with all
Sleep Mode
By default, the scanner will enter Sleep Mode after 15 minutes of inactivity, and will turn off automatically after two hours of inactivity to conserve power. To change the default sleep and
1.Press the Tools (
) button to start the HP Scanner Tools Utility.
2.Click the Settings tab, and then select the appropriate sleep mode and
●To specify the period of inactivity after which the scanner goes into Sleep Mode, select 15 minutes or 1 hour from the Sleep: Put the scanner to sleep after:
●To specify the period of inactivity after which the scanner automatically turns off, select the appropriate value (1 hour, 2 hours, 4 hours, or Never) from the
ENWW | Sleep Mode 7 |
