5
Installation clearances
The location must be large enough to allow the washer door

to be fully opened.

Additional spacing should be considered for ease of

installation and servicing. The door opens more than 90°, and

it is not reversible.

Additional clearances might be required for wall, door, and

floor moldings.

Additional spacing of 1" (2.5 cm) on all sides of the washer is

recommended to reduce noise transfer.

Companion appliance spacing should also be considered.
Washer Dim ensionsRecommended installation spacing for custom undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

Recommended installation spacing for recessed or closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

Recessed or closet installation - Washer on pedestal
36.2
(92 cm)
23.4"
(59.5 cm)
"
32.9"
(83.5 cm)
20.1"
(51 cm)
1"
(2.5 cm) 1"
(2.5 cm)
32.9" min.
(83.5 cm)
23.4"
(59.5 cm)
2" (5 cm)
A.Side view - closet or confined area
B.Closet door with vents
A.Recessed area
B.Side view - closet or confined area
34"
(86.4 cm)
AB
3"
(7.6 cm)
3"
(7.6 cm)
1"
(2.5 cm) 4"
(10.2 cm)
20.1"
(51.0 cm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
1"
(2.5 cm) 20.1"
(51.0 cm)
1"
(2.5 cm) 1"
(2.5 cm)
23.4"
(59.5 cm) 4"
(10.2 cm)
18" min.
(45.7 cm)

AB