The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice clogged in the ice storage bin or delivery chute? Remove clogged ice, using a plastic utensil if necessary. Clean chute and bottom of storage bin using a warm moist cloth, and dry both thoroughly. To avoid clogging and maintain a fresh supply of ice, empty the storage bin and clean both the bin and delivery chute every two weeks.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements.”

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser for 2 to 3 seconds after releasing the dispenser lever/pad.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough (on some models)

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order replacement filters, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2 and P2RFWG2)

11

Page 10 Page 12
Page 11
Image 11
Whirlpool W10193164A Accessories, Dispenser water is not cool enough on some models, Stainless Steel Cleaner and Polish
Page 10 Page 12

W10193164A specifications

The Whirlpool W10193164A is an innovative and versatile refrigerator water filter designed to enhance the quality of drinking water inside your home. This essential appliance accessory is compatible with various Whirlpool side-by-side and French door refrigerators, making it a popular choice among homeowners seeking to improve their household water supply.

One of the main features of the W10193164A is its advanced filtration technology, which effectively reduces a variety of contaminants, including chlorine, lead, and sediment. By doing so, it not only improves the taste and odor of your water but also ensures that you have access to cleaner, healthier drinking water. The filter utilizes a carbon block design, which has proven to be effective in retaining impurities while allowing essential minerals to remain in the water.

Installation of the W10193164A is a straightforward process, designed for user convenience. Most users can replace the filter in a matter of minutes without the need for additional tools, making it accessible to everyone, whether they are a seasoned DIYer or someone new to home maintenance. Additionally, the filter typically features a “filter change” indicator on the refrigerator, notifying users when it’s time to replace the filter for optimal performance.

The durability of the W10193164A is another noteworthy characteristic. With a lifespan of up to six months, this water filter provides continual high-quality water, saving you money and reducing waste compared to single-use bottled water. Furthermore, the filter meets rigorous industry standards, ensuring that it delivers reliable performance throughout its lifespan.

Eco-friendliness also plays a significant role in the appeal of the Whirlpool W10193164A. By choosing to use this filter, households can reduce their reliance on plastic bottled water, thus contributing to a more sustainable environment.

Overall, the Whirlpool W10193164A water filter embodies efficiency, convenience, and reliability, making it an essential accessory for any Whirlpool refrigerator. By investing in this filter, homeowners can enjoy peace of mind knowing that they are providing their families with safer, better-tasting water straight from their refrigerator.
Top Page Image Contents