Tiny scratches and abrasions

Use Cooktop Cleaner for scratches. Scratches and abrasions do not affect cooking performance, and after many cleanings they will become less noticeable.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool, abrasive cleansers or oven cleaner.

To avoid damage, do not soak knobs.

When replacing knobs, make sure knobs are in the OFF position. On some models, do not remove seals under knobs.

Cleaning Method:

Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive cleaners, steel-wool pads, gritty washcloths or abrasive paper towels.

Cleaning Method:

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

All-Purpose Appliance Cleaner Part Number 31682 (not included):

See cover for contact information.

OVEN RACKS

Cleaning Method:

Steel-wool pad

For racks that have discolored and are harder to slide, a light coating of vegetable oil applied to the rack guides will help them slide.

STORAGE DRAWER OR WARMING DRAWER (on some

models)

Check that storage drawer or warming drawer is cool and empty before cleaning.

Cleaning Method:

Mild detergent

The oven light is a standard 40-watt appliance bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the off position.

To Replace:

1.Unplug range or disconnect power.

OvenLight

2.Turn the glass bulb cover in the back of the oven counterclockwise to remove.

3.Turn bulb counterclockwise to remove from socket.

4.Replace bulb, then bulb cover by turning clockwise.

5.Plug in range or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference Frequently Asked Questions (FAQs)

to possibly avoid the cost of a service call.

www.whirlpool.com

Nothing will operate

Is the power supply cord unplugged? Plug into a grounded outlet.

Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Cooktop will not operate

Is the control knob set correctly? Push in knob before turning to a setting.

On ceramic glass models, is the oven control lockout set? See the control lock keypad feature in the “Feature Guide” section.

Has a self-clean cycle been selected?

On some ceramic glass models, the cooktop will not operate during a self-clean cycle.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

Is the control knob set to the proper heat level? See “Cooktop Use” section.

Is the range level?

Level the range. See the Installation Instructions.

Oven will not operate

Is the electronic oven control set correctly? See “Electronic Oven Controls” section.

Has a delay start been set? See “Timed Cooking” section.

On some models, is the oven control lockout set?

See the control lock keypad feature in the “Feature Guide” section.

Oven temperature too high or too low

Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section of the “Electronic Oven Controls” section.

Oven indicator lights flash

Do the oven indicator lights flash?

See “Control Display” in the “Electronic Oven Controls” section. If the indicator light(s) keeps flashing, call for service. See cover for contact information.

10

Page 10
Image 10
Whirlpool W10200357C warranty Troubleshooting, OvenLight