IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic

precautions:

■Plug into a grounded 3 prong outlet.

■Do not remove ground prong.

■Do not use an adapter.

■Do not use an extension cord.

■Disconnect power before cleaning.

■Disconnect power before servicing.

■Replace all parts and panels before operating.

■Use two or more people to move and install ice maker.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Unpack the IceMaker

WARNING

Excessive Weight Hazard

Use two or more people to move and install ice maker. Failure to do so can result in back or other injury.

Removing Packaging Materials

Remove tape and glue from your ice maker before using.

■The ice maker must be installed in an area sheltered from the elements, such as wind, rain, water spray, or drip.

■When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown.

NOTES:

■Be sure the power supply cord is not pinched between the ice maker and the cabinet.

■Be sure the water supply line is not pinched between the ice maker and the cabinet.

■Be sure the drain line (on some models) is not pinched between the ice maker and the cabinet.

■To remove any remaining tape or glue from the exterior of the ice maker, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. Do not use chlorine bleach on the stainless steel surfaces of the ice maker. These products can damage the surface of your ice maker.

Cleaning Before Use

34"

(86.4 cm)

Min.

34¹⁄₂"

(87.6 cm)

Max.

11¹⁄₂" (29.2 cm)

3¹⁄₂" 9"

(8.9 cm)(22.9 cm)

A

28¹⁄₂"

(72.4 cm)

After you remove all of the packaging materials, clean the inside of your ice maker before using it. See the cleaning instructions in the “Ice Maker Care” section.

LocationRequirements

■To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The ice maker may be closed-in on the top and three sides, but the installation should allow the ice maker to be pulled forward for servicing if necessary.

■Installation of the ice maker requires a cold water supply inlet of ¹⁄₄" (6.35 mm) OD soft copper tubing with a shutoff valve and either a gravity-drain system or condensate pump to carry the water to an existing drain.

■Choose a well ventilated area with temperatures above 55°F (13°C) and below 110°F (43°C). Best results are obtained between 70°F (21°C) and 90°F (32°C).

B

24"

(60.1 cm)

15"

(38.1 cm)

A. Recommended location for electrical and plumbing fixtures

B. Floor level

■Choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If needed, you can adjust the height of the ice maker by changing the height of the leveling legs. See “Leveling.”

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10282149B manual Installation Instructions, Unpack the IceMaker, LocationRequirements, Cleaning Before Use
Page 2 Page 4

W10282149B specifications

The Whirlpool W10282149B is a cutting-edge refrigerator designed to enhance convenience and efficiency in your kitchen. It combines advanced technology with a sleek design, making it a popular choice for modern households. This refrigerator stands out with its ample storage capacity, allowing families to store fresh food and beverages without worrying about running out of space.

One of the main features of the Whirlpool W10282149B is its Adaptive Defrost technology. This innovative feature adjusts the defrosting cycle based on the refrigerator's usage patterns. By optimizing the defrost schedule, it helps maintain ideal temperatures while reducing energy consumption. This not only contributes to a more energy-efficient appliance but also ensures that your food stays fresher for longer.

Another remarkable aspect of the W10282149B is its Accu-Chill temperature management system. This system uses built-in sensors to monitor the internal temperature and adjust cooling accordingly. As a result, it quickly reaches the desired temperature after loading groceries and maintains a consistent environment for optimal food preservation. This technology is particularly beneficial in preventing spoilage and extending the shelf life of perishable items.

The refrigerator boasts a sleek, finger-resistant stainless steel exterior, which adds a modern touch to any kitchen. Additionally, it features adjustable shelves and humidity-controlled crisper drawers, providing flexibility for organizing your groceries. The design allows you to customize the interior layout according to your storage needs, making it easier to access your favorite foods.

Energy efficiency is a priority for Whirlpool, and the W10282149B is no exception. It is ENERGY STAR certified, which means it meets strict energy efficiency guidelines. This certification translates into cost savings on your energy bill and a reduced carbon footprint.

Furthermore, the W10282149B includes a factory-installed ice maker, ensuring a steady supply of ice for your drinks. This feature eliminates the need for manual ice trays, adding a level of convenience to your daily routine.

In conclusion, the Whirlpool W10282149B refrigerator is a versatile appliance that combines advanced technologies with user-friendly features. Its adaptive defrost, Accu-Chill temperature management system, and customizable storage options make it an ideal choice for families seeking efficiency and reliability in their kitchen.
Top Page Image Contents