Whirlpool W10326800B manual Base Grille, Power Interruptions, Changing the Light Bulb, Moving Care

Models: W10326800B

1 32
Download 32 pages 47.34 Kb
Page 12
Image 12
Base Grille

Base Grille

To Remove and Replace the Base Grille:

1.Open the freezer door and remove the base grille by pulling down and out from the top.

2.Replace the base grille by putting the clips in the openings in the refrigerator panel. Push in until the base grille snaps into place.

Power Interruptions

If the power will be out for 24 hours or less, keep the door closed to help food stay cold and frozen.

If the power will be out for more than 24 hours, do one of the following:

Remove all frozen food and store it in a frozen food locker.

If a food locker is not available, consume or can perishable food at once.

After the power is restored, unplug the freezer for 30 minutes, to allow the refrigeration system to equalize. During this time keep the door closed whenever possible.

REMEMBER: A full freezer stays cold longer than a partially filled one. A freezer full of meat stays cold longer than a freezer full of baked goods. If you see that food contains ice crystals, it may be refrozen, although the quality and flavor may be affected. If the condition of the food is poor, dispose of it.

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your freezer. Be sure to replace the bulb with one of the same size, shape, and wattage.

Style 1

1.Unplug freezer or disconnect power.

2.Replace the light bulb with an appliance bulb of the same wattage.

3.Plug in freezer or reconnect power.

Style 2

1.Unplug freezer or disconnect power.

2.Remove the light shield. From the front of the light shield, push backward and down.

3.Replace the light bulb with an appliance bulb of the same wattage.

4.Replace the light shield.

5.Plug in freezer or reconnect power.

Moving Care

When you are moving your freezer to a new home, follow these steps to prepare it for the move.

1.Remove all frozen food.

2.Unplug the freezer.

3.Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.

4.Clean the freezer thoroughly.

5.Tape the freezer shut and tape the electrical cord to the cabinet.

When you get to your new home, refer to the “Installation Instructions” and “Freezer Use” sections for information on installation and setting the controls.

12

Page 12
Image 12
Whirlpool W10326800B manual Base Grille, Power Interruptions, Changing the Light Bulb, Moving Care, Style