To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, muriatic acid, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on exterior surfaces (doors and cabinet), plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.

1.Unplug refrigerator or disconnect power.

2.Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.

3.Clean the exterior surfaces.

Painted metal: Wash painted metal exteriors with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

Stainless steel: Wash stainless steel surfaces with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

NOTE: When cleaning stainless steel, always wipe in the direction of the grain to avoid cross-grain scratching.

4.There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency. If you need to clean the condenser:

Remove the base grille.

Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area of the condenser.

Replace the base grille when finished.

5.Plug in refrigerator or reconnect power.

Changing the Light Bulb

IMPORTANT: The light bulbs in both the refrigerator and freezer compartments of your new refrigerator use LED technology. If the lights do not illuminate when the refrigerator and/or freezer door is opened, call for assistance or service. In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.

1.Unplug the refrigerator or disconnect power.

2.Remove the light shield (on some models).

Top of the refrigerator compartment - Slide the light shield toward the back of the compartment to release it from the light assembly.

3.Replace the burned-out LED bulb(s) with a bulb of the same size, shape and wattage.

To replace the burned-out LED bulb with an LED bulb, order Whirlpool part number W10565137 (3.6 watts).

NOTE: Some LED replacement bulbs are not recommended for wet/damp environments. The refrigerator and freezer compartments are considered to be wet/damp environments. If using a brand of LED bulb other than the Whirlpool recommended LED bulb, before installation, read and follow all instructions on the LED packaging.

If an incandescent bulb is used to replace an LED bulb, use only incandescent bulbs for household appliances with a maximum of 40 watts.

4.Replace the light shield.

5.Plug in refrigerator or reconnect power.

Vacation and Moving Care

Vacations

If You Choose to Leave the Refrigerator On While You’re Away:

1.Use up any perishables and freeze other items.

2.If your refrigerator has an automatic ice maker, and is connected to the household water supply, turn off the water supply to the refrigerator. Property damage can occur if the water supply is not turned off.

3.If you have an automatic ice maker, turn off the ice maker.

NOTE: Depending on your model, raise the wire shutoff arm to OFF (up) position, or press the switch to OFF.

4.Empty the ice bin.

If You Choose to Turn Off the Refrigerator Before You Leave:

1.Remove all food from the refrigerator.

2.If your refrigerator has an automatic ice maker:

Turn off the water supply to the ice maker at least one day ahead of time.

When the last load of ice drops, raise the wire shutoff arm to the OFF (up) position or press the switch to OFF, depending on your model.

3.Turn off the Temperature control(s). See “Using the Control(s).”

4.Clean refrigerator, wipe it, and dry well.

5.Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up.

Moving

When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.

1.If your refrigerator has an automatic ice maker:

Turn off the water supply to the ice maker at least one day ahead of time.

Disconnect the water line from the back of the refrigerator.

When the last load of ice drops, raise the wire shutoff arm to the OFF (up) position or press the switch to OFF, depending on your model.

2.Remove all food from the refrigerator and pack all frozen food in dry ice.

3.Empty the ice bin.

4.Turn off the Temperature control(s). See “Using the Control(s).”

5.Unplug refrigerator.

6.Clean, wipe, and dry thoroughly.

7.Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.

8.Depending on the model, raise the front of the refrigerator so it rolls more easily OR raise the leveling screws so they don't scrape the floor. See “Adjust the Door(s)” or “Door Closing and Door Alignment.”

9.Tape the doors closed and tape the power cord to the back of the refrigerator.

When you get to your new home, put everything back and refer to the “Installation Instructions” section for preparation instructions. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply to the refrigerator.

15

Page 15
Image 15
Whirlpool WRF535SMBM Changing the Light Bulb, Vacation and Moving Care, To Clean Your Refrigerator

WRF535SMBM specifications

The Whirlpool WRF535SMBM is a sleek and modern refrigerator designed to meet the needs of contemporary households while maximizing convenience and efficiency. This model features a counter-depth design, which allows it to fit seamlessly into your kitchen layout, offering a built-in look without the high cost typically associated with custom cabinetry.

One of the standout features of the WRF535SMBM is its spacious interior, with a total capacity of 25 cubic feet, providing ample storage space for groceries and household items. The refrigerator is designed with an organization-friendly layout, featuring adjustable shelves, gallon door bins, and crisper drawers that help keep fruits and vegetables fresh for longer. The humidity-controlled crisper drawers are a notable technology, as they maintain optimal moisture levels to extend the life of leafy greens and other produce.

Energy efficiency is another key characteristic of this model. The Whirlpool WRF535SMBM is Energy Star certified, ensuring it consumes less energy compared to non-certified models. This commitment to energy efficiency not only helps reduce your utility bills but also minimizes your carbon footprint, making it a responsible choice for environmentally conscious consumers.

The refrigerator's exterior is equipped with a fingerprint-resistant stainless steel finish, which not only adds a touch of elegance to your kitchen but also makes cleaning and maintenance easier. The external water and ice dispenser is another convenient feature, offering filtered water and ice without having to open the refrigerator door, enhancing energy efficiency and convenience for daily hydration needs.

Additionally, the WRF535SMBM incorporates advanced cooling technologies. The Adaptive Defrost system helps optimize energy usage by determining when defrosting is needed, while the FreshFlow air filter actively circulates air to reduce odors and keep your food tasting fresh. The LED lighting throughout the interior provides bright illumination, making it easy to find items in your refrigerator, even in dim light.

With its combination of style, functionality, and advanced technologies, the Whirlpool WRF535SMBM is an ideal choice for families and individuals looking to invest in a reliable and attractive refrigerator that meets modern demands. Its thoughtful design and features ensure that it not only complements your kitchen aesthetic but also enhances your culinary experience by keeping your food fresh and organized.