Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: This refrigerator is designed for indoor, household use only.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for 1"

(2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave 2¹⁄₂" (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.

¹⁄₂" (1.25 cm)

2¹⁄₂" (6.3 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 volt, 60 Hz, AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the refrigerator to OFF. Depending on your model, either turn the freezer control to the word OFF, or press the Minus sign touch pads repeatedly until a dash (–) appears in both the Freezer and Refrigerator displays as shown. Disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the temperature controls to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

■For models with water filters, the disposable water filter should be replaced at least every 6 months.

4

Page 3 Page 5
Page 4
Image 4
Whirlpool WRF535SMBM Location Requirements, Electrical Requirements, Water Supply Requirements, Tools Needed
Page 3 Page 5

WRF535SMBM specifications

The Whirlpool WRF535SMBM is a sleek and modern refrigerator designed to meet the needs of contemporary households while maximizing convenience and efficiency. This model features a counter-depth design, which allows it to fit seamlessly into your kitchen layout, offering a built-in look without the high cost typically associated with custom cabinetry.

One of the standout features of the WRF535SMBM is its spacious interior, with a total capacity of 25 cubic feet, providing ample storage space for groceries and household items. The refrigerator is designed with an organization-friendly layout, featuring adjustable shelves, gallon door bins, and crisper drawers that help keep fruits and vegetables fresh for longer. The humidity-controlled crisper drawers are a notable technology, as they maintain optimal moisture levels to extend the life of leafy greens and other produce.

Energy efficiency is another key characteristic of this model. The Whirlpool WRF535SMBM is Energy Star certified, ensuring it consumes less energy compared to non-certified models. This commitment to energy efficiency not only helps reduce your utility bills but also minimizes your carbon footprint, making it a responsible choice for environmentally conscious consumers.

The refrigerator's exterior is equipped with a fingerprint-resistant stainless steel finish, which not only adds a touch of elegance to your kitchen but also makes cleaning and maintenance easier. The external water and ice dispenser is another convenient feature, offering filtered water and ice without having to open the refrigerator door, enhancing energy efficiency and convenience for daily hydration needs.

Additionally, the WRF535SMBM incorporates advanced cooling technologies. The Adaptive Defrost system helps optimize energy usage by determining when defrosting is needed, while the FreshFlow air filter actively circulates air to reduce odors and keep your food tasting fresh. The LED lighting throughout the interior provides bright illumination, making it easy to find items in your refrigerator, even in dim light.

With its combination of style, functionality, and advanced technologies, the Whirlpool WRF535SMBM is an ideal choice for families and individuals looking to invest in a reliable and attractive refrigerator that meets modern demands. Its thoughtful design and features ensure that it not only complements your kitchen aesthetic but also enhances your culinary experience by keeping your food fresh and organized.
Top Page Image Contents