There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Iceand Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely,” earlier in this section.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

The water dispenser will not operate properly

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? Straighten the water source line.

■New installation? Flush and fill the water system. See “Water Dispenser.”

■Is the water pressure at least 35 psi (241 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Water filter installed on the refrigerator? Remove filter and operate dispenser. If water flow increases, the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely,” earlier in this section.

■Recently removed the doors? Make sure the water dispenser wire/tube assembly has been properly reconnected. See “Refrigerator Doors.”

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Water is leaking from the dispenser system

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■New installation? Flush the water system. See “Water Dispenser.”

■Recently changed water filter? Flush the water system. See “Water Dispenser.”

■Water on the floor near the base grille? Make sure the water dispenser tube connections are fully tightened. See “Refrigerator Doors.”

Water from the dispenser is warm

NOTE: Water from the dispenser is only chilled to 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

19

Page 18 Page 20
Page 19
Image 19
Whirlpool WRT771RWYM Iceand Water, There is interior moisture buildup, Humid room? Contributes to moisture buildup
Page 18 Page 20

WRT771RWYB, WRT771RWYM, WRT771RWYW specifications

The Whirlpool WRT771RWYW, WRT771RWYM, and WRT771RWYB are modern refrigerators that exemplify the combination of style, functionality, and innovation. Designed to meet the needs of today's households, these models offer a range of features that enhance user convenience and food preservation.

At the core of these refrigerators is their spacious interior. With a total capacity of approximately 19 cubic feet, they provide ample storage space for groceries and other essentials. The adjustable shelving allows users to customize the layout to accommodate items of varying heights, ensuring that no space is wasted. The crispers, designed specifically for fruits and vegetables, help maintain optimal humidity levels, keeping produce fresh for longer periods.

Energy efficiency is a key feature of the WRT771 series. These models are ENERGY STAR certified, which means they consume less electricity compared to traditional refrigerators, helping users save on energy bills while contributing to environmental sustainability. The efficient cooling system not only maintains ideal temperatures but also minimizes noise, ensuring a quiet kitchen environment.

One of the standout technologies in these models is the SpillGuard glass shelves. Designed to contain spills and prevent them from spreading, these shelves simplify cleaning and promote hygiene. Additionally, the easy-to-use temperature controls allow users to set their desired cooling levels effortlessly.

The exterior design of the WRT771 series is equally impressive. Available in a variety of finishes, including white and black, these refrigerators enhance kitchen aesthetics while providing modern appeal. The ergonomic door handles and sleek lines add to the overall contemporary look.

Another notable characteristic is the top freezer configuration, which provides convenient access to frozen foods while keeping fresh items at eye level. The freezer compartment is spacious enough to store bulk items, with ample shelving and bins for organization.

For families and individuals with varied lifestyles, the Whirlpool WRT771RWYW, WRT771RWYM, and WRT771RWYB models deliver reliability, versatility, and efficiency. With their innovative features and thoughtful design, they stand out as excellent choices for anyone looking to upgrade their kitchen appliances and enhance their food storage solutions.
Top Page Image Contents