Important Safety Instructions
Reduce risk of fire, electrical shock or personal injury when using air conditioner by following these basic precautions:
. Complete all of the Installation Instructions to prevent product operating problems and possible personal injury.
mRead all operating instructions before using air conditioner.
I Do Not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create fire hazard or explosion.
. Use only a properly grounded electrical outlet. Check with a qualified electrician if you are in doubt as to whether the air conditioner is properly grounded. Do Not modify the plug on the power cord. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
1 Do Not use an extension cord. I Do Not have a fuse in the
neutral or grounding circuit.
Save these instructions
Starting your air conditioner.
1. Set the Exhaust Control’ to the “Closed” position or the Air Control
to the “Off”position depending on which feature your air conditioner has. This position will provide for maximum cooling.
*Consoles shown may vary slightly from vour air conditioner. The controls on jr0u.r air conditioner will operate the same as explained in this section.
2. Set the System Control to the desired setting. Suggestions are as follows:
Lo Cool - for sleeping comfort
Med Cool - for normal cooling
Hi Cool - for maximum cooling
Fan Only - for air circulation
without cooling.
3. Set the Thermostat Control to number 6. You can adjust the cooling performance by resetting the Thermostat Control to a higher number for more cooling or to a lower number for less cooling. You will need to experiment to find the setting which you prefer.
If you turn your air conditioner off, wait two or three minutes before turning it back on. The amount of time to wait is printed on your console. You may blow the fuse in the fuse box or trip the circuit breaker if you Do Not follow these instructions.
Using special features.. .
Exhaust Control
Use this feature to draw stale or smoky air from the room or to circulate air in the room.
Seethe chart to determine what settings to select for the type of air control you desire.
Note: Energy efficiency is decreased when exhausting room air and cooling at the same time.
Air Control
Use this feature to draw stale or smoky air from the room or to circulate fresh air from the outside into the room.
Seethe chart to determine what settings to select for the type of air control you desire.
Note: Energy efficiency is decreased when exhausting room air or circulating fresh air into the room and cooling at the same time.
Exhaust | Control |
| |
Room air | desired | Exhaust Contrc | |
|
| I | setting |
Exhaust | room air | “Open’ | |
Circulate | room | air | ‘Closed |
I cooling only | I | ‘Closed |
Air | Control |
|
| ||
I | Room air desired | Air Conlzol | |||
|
|
|
| I setting | |
| Exhaust | room | air | ‘Exhaust” | |
| Circulate | fresh | air | ‘Fresh Air” | |
| into | the | room |
|
|
| Circulate | room | air | ||
| cooling | only |
| ‘Off |