First-Time Setup
3
11
Chapter 3: Completing the First-Time Setup
The rst time you turn on the TV, the Setup App will guide you through each of the steps
necessary to get your TV ready for use.
Before you begin the rst-time setup:
• Your TV should be installed. See

Chapter 1: Installing the TV on page 1

.
• Your devices should be connected. See

Chapter 2: Controls and Connections on page

4

.
• If you have a wireless network, have the network key ready.
• If you are connecting to your network with an ethernet cable,
connect it to the ethernet port on the TV.
To complete the rst-time setup:
1. Press the Power/Standby button on the remote. The
TV powers on and the Setup App starts.
2. Activate the remote by pressing Record and the
Green VIA Shortcut button for 5 seconds, then
highlight Begin Activation and press OK.
Wait for the remote to be found.
3. When the remote is found, use the Arrow Up/Down
buttons on the remote to highlight Connect to the
Internet and press OK.