Whirlpool YKHMS1850S Tones, Timer, ControlLock, VentFan, CooktopLight, DemoMode, One tone, To Set

Models: YKHMS1850S

1 36
Download 36 pages 2.69 Kb
Page 7
Image 7
Tones

Tones

Tones are audible signals, indicating the following:

One tone

Valid entry (short tone)

End of Timer countdown (long tone)

Two tones

Reminder, repeat each minute after the end-of-cycle tones

End of stage in multistage cooking

Hidden feature has been entered or exited

Three tones

Invalid entry

Four tones

End of cycle

To Turn Off Valid Entry Tones: Touch and hold the number pad “1” for 5 seconds until 2 tones sound. Repeat to turn tones back on.

To Turn Off All Tones (except end-of-Timer and hidden feature signals): Touch and hold the number pad “2” for

5 seconds until 2 tones sound. Repeat to turn tones back on.

Timer

The Timer can be set in minutes and seconds, up to 99 minutes 99 seconds and counts down the set time.

NOTE: The Timer does not start or stop the microwave oven.

When the Timer is in use, the microwave oven can also operate. To see the countdown for 5 seconds when the microwave oven is in use, touch TIMER.

To Set:

1.Touch TIMER.

If no action is taken after 1 minute, the display will return to the time of day mode.

2.Touch the number pads to set the length of time.

3.Touch TIMER or START.

If TIMER or START is not touched within 5 seconds, “START?” will appear in the display. If TIMER or START is not touched within 1 minute, the display will return to the time of day mode and the programmed function will be canceled.

When the set time ends, “END” will appear in the display and 1 tone will sound.

Touching OFF while a cook function is active in the display will cancel the cook function, not the Timer.

To cancel the Timer, touch TIMER or OFF while the countdown is active in the display.

The length of time can be changed during the countdown by repeating the above steps.

ControlLock

The Control Lock shuts down the control panel pads to avoid unintended use of the microwave oven. When the control is locked, only the Vent Fan and Light pads will function.

To Lock/Unlock Control: The microwave oven and Timer must be off. Touch and hold OFF for 5 seconds until 2 tones sound and a lock icon appears in the display. Repeat to unlock and remove the lock icon from display.

VentFan

The vent fan has 4 speeds: high, medium-high, medium and low.

To protect the microwave oven, if the temperature from the range or cooktop below the microwave oven gets too hot, the vent fan will automatically turn on at high speed. It may stay on for up to 1 hour to cool the microwave oven. When this occurs, the vent fan cannot be turned off.

To Turn Vent Fan On/Off: Repeatedly touch the VENT FAN

4 SPEEDS pad to cycle through the 4 speeds, and then turn the fan off.

CooktopLight

The cooktop light has 3 settings: on, night and off.

To Turn On/Night/Off: Touch LIGHT ON/NIGHT/OFF pad repeatedly to cycle through the settings.

DemoMode

The Demo Mode is ideal for learning how to use the microwave oven. When set, functions can be entered without actually turning on the magnetron. The microwave oven light will come on, the fan will run, and if on, the turntable will rotate.

To Turn On/Off: The microwave oven and Timer must be off. Touch and hold TIMER for 5 seconds until 2 tones sound and “d” appears in the display. Repeat to turn off and remove “d” from the display.

7

Page 7
Image 7
Whirlpool YKHMS1850S Tones, Timer, ControlLock, VentFan, CooktopLight, DemoMode, One tone, Two tones, Three tones, To Set