Tucks, Design, Remove the left or right Needle

13.

TUCKS

Pin tucks are overlocked on Use the cutter as a guide but

the

edge.

do not cut your fabric.

Pin tucking is suited clothing and a lady’s

to the	design

blouse.

of a child’s

for your

desired pintuck width. (Sew only with the one needle.)

Raise

the

foot lifter.

(2)The tension is set for normal (See P12)

Mark and

press

pin tucks in

The differential feed ratio is normally “N”.

(3)

plate and start to sew.

Make chain-stitch at the end of the sewing.

(4)The tuck is ironed to one side when your Dewing 5 finished

—25—

Image 30

Contents

UC mDr00 Rear of arm FitThis appliance Future reference Open ?erate where Needles NeedleArea, such as Contents Presser foot 9DfferentialfeeddialParts Presser Raise presser foot Operation and Function of Parts Disengaging For ease For SEW!NG ConnectingPower Cord Same as Setting Telescopic Thread Stand Changing ThreadsTie threads Replacing Needle NeededSame Threading ThreadingPass Looper threading Guide Preparation for Sewing and Checking Before SettingBeginning Fabric Sewing Thr EryFoot PreSsure Tension Chart Thread Unbalanced Upper Thread Tension AdjustmentTension Thread Wraps BC 0z hi Stitch Length Adjustment IndicatorAdjusting Balance of Stitch Width and Cutting Width Ma riols ‘oven IcrErsPy 07N Corded RoughNrrow Corded Sewing for Curved Seams Three Thread Overlock Stitch Using I Needle Needle By removing the left needle Overlock Using NeedleConversion To 2-Thread Thread Overlock Stitch Stitch SelecUon 1111Thread 0FJ Thread RolledRolled Edge + Adjust as needed according to the kind Uiread Rofled EdgeFabric and the threads. See. P.29 Remove the left or right Needle TucksDesign Over lock Advance Screwj Changing Light BulbLubrication Servicing StoragePlease Addressed Tieezers Brush AccessoryLcaning Sheath Thick material Poluesterspun, filamentTable of Sewing MATERIALS, Needles and Threads Crepe Georgette Problem SQiLEMSolving SPECIF!CA11ONS NeedlesSpeed