Blade Care

WARNING: When removing the cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade.

Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Replace when necessary. Follow the steps below for blade service:

1.Disconnect spark plug wire from spark plug.

2.Tip mower as specified in separate engine manual. If it does not specify turn mower on its side making sure that the air filter and the carburetor are up.

3.Remove the bolt and the blade bell support which hold the blade and the blade adapter to the engine crankshaft. See Figure 11.

4.Remove blade and adapter from the crank- shaft.

5.The blade may be resharpened by removing it and either grinding or filing the cutting edge keeping as close to the original bevel as possible. Do not attempt to sharpen the blade while it is still on the mower.

6.It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade.

NOTE: Improper blade balance will result in excessive vibration causing eventual damage to the engine and mower. Be sure to carefully bal- ance blade after sharpening. Possible damage resulting from blade unbalance condition is not the responsibility of the manufacturer.

NOTE: Always remove blade from the adapter for testing balance.

7.The blade can be tested for balance by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly.

8.Before reassembling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil.

Figure 11

9.Install the blade adapter on the crankshaft with the “star” away from the engine. See Figure 11. Place the blade with the side marked “bottom” (or with part number) facing away from the adapter. Align the blade bell support over the blade with the tabs in the holes of the blade and insert the hex bolt.

10.Tighten the hex bolt to the torque listed below:

Blade Mounting Torque

Center Bolt 450 in. lb. min., 600 in.lb. max.

To insure safe operation of your unit, ALL nuts and bolts must be checked periodically for correct tightness.

Off-Season Storage

The following steps should be taken to prepare your lawn mower for storage.

1.Clean and lubricate mower thoroughly as described in the lubrication instructions.

2.We do not recommend the use of a pressure washer or garden hose to clean your unit.

3.Refer to engine manual for correct engine storage instructions.

4.Coat mower’s cutting blade with chassis grease to prevent rusting.

5.Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.

NOTE: When storing any type of power equip- ment in a poorly ventilated or metal storage shed, care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts of your lawn mower before storage.

5

Maintenance

WARNING

When removing the cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade.

An unbalanced blade will cause excessive vibration when rotat- ing at high speeds. It may cause damage to mower, and could break causing per- sonal injury.

Cutting grass in sandy soil condition causes abrasive wear to the blade.

11

Page 10 Page 12
Page 11
Image 11
White Outdoor 100 Blade Care, Remove blade and adapter from the crank- shaft, Blade Mounting Torque, Off-Season Storage
Page 10 Page 12

100 specifications

The White Outdoor 100 is a remarkable outdoor equipment model designed for durability and performance in challenging environments. Built for lawn care enthusiasts and professionals, this versatile machine confidently tackles a variety of outdoor tasks, making it a popular choice among homeowners and landscapers alike.

One of the standout features of the White Outdoor 100 is its powerful engine. Equipped with a reliable 4-stroke engine, this model combines strength with efficiency, providing ample power to handle even the toughest cutting conditions. The engine is designed for easy starting and smooth operation, allowing users to begin their tasks right away without the hassle of complicated setups.

The cutting deck of the White Outdoor 100 is another highlight, featuring a robust construction that ensures longevity while also delivering a professional-quality cut. With adjustable cutting heights, users can easily customize their lawn's appearance to their preference. This flexibility not only enhances aesthetic appeal but also promotes healthy grass growth by preventing scalping.

In terms of technology, the White Outdoor 100 incorporates advanced features that enhance user experience and efficiency. Its intuitive control panel allows for easy navigation through various settings, giving users the ability to fine-tune their mowing experience. The model also boasts ergonomic handles designed to reduce fatigue during extended use, ensuring comfort without compromising performance.

The White Outdoor 100 is built with a sturdy frame that withstands rough terrain, making it suitable for residential and commercial applications. The addition of all-terrain wheels provides excellent traction and stability, allowing users to confidently maneuver across different landscapes. This feature is particularly beneficial for those with uneven ground or obstacles such as tree roots and rocks.

Maintenance of the White Outdoor 100 is straightforward, thanks to its easily accessible components. Users can quickly perform routine tasks such as oil changes and blade sharpening, facilitating a longer lifespan for the machine. The design also emphasizes safety, incorporating features such as blade brake systems that engage when the operator releases the traction controls, minimizing the risk of accidents.

Overall, the White Outdoor 100 stands out as a top choice for quality and reliability. Its combination of a powerful engine, adjustable features, ergonomic design, and ease of maintenance makes it a valuable addition to any outdoor toolkit. Whether tackling a small residential lawn or a more expansive commercial space, this model proves itself capable, efficient, and user-friendly.
Top Page Image Contents