Manuals / White Outdoor / Lawn and Garden / Snow Blower

White Outdoor 769-01923A warranty Chute Clean-Out Tool, To Engage Drive, To Engage Augers

Models: 769-01923A

1 28
Download 28 pages 47.52 Kb
Page 11
Image 11

Chute Clean-Out Tool

The chute clean-out tool is conveniently fastened to the rear of the auger housing with a mounting clip. Should snow and ice become lodged in the chute assembly during operation, proceed as follows to safely clean the chute assembly and chute opening:

1.Release both the Auger Control and the Drive Control.

2.Stop the engine by removing the ignition key.

3.Remove the clean-out tool from the clip which secures it to the rear of the auger housing.

4.Use the shovel-shaped end of the clean-out tool to dislodge and scoop any snow and ice which has formed in and near the chute assembly.

5.Refasten the clean-out tool to the mounting clip on the rear of the auger housing, reinsert the ignition key and start the snow thrower’s engine.

6.While standing in the operator’s position (behind the snow thrower), engage the auger control for a few seconds to clear any remaining snow and ice from the chute assembly.

To Engage Drive

1.With the throttle control in the Fast (rabbit) position, move shift lever into one of the six forward (F) positions or two reverse (R) positions. Select a speed appropriate for the snow conditions and a pace you’re comfortable with.

2.Squeeze the auger control against the handle and the augers will turn. Release it and the augers will stop.

3.Squeeze the drive control against the handle the snow thrower will move. Release it and drive motion will stop.

To Engage Augers

1.To engage the augers and start throwing snow, squeeze the auger control against the left handle. Release to stop the augers.

Auger Control Test

Perform the following test before operating your snow thrower for the first time and at the start of each winter. Check the adjustment of the auger control as follows:

1.When the auger control is released and in the disengaged “up” position, the cable should have very little slack. It should NOT be tight.

2.In a well-ventilated area, start the snow thrower engine as instructed on the previous page. Make sure the throttle is set in the FAST position.

3.While standing in the operator’s position (behind the snow thrower), engage the auger.

4.Allow the auger to remain engaged for approximately ten (10) seconds before releasing the auger control. Repeat this several times.

5.With the throttle control in the FAST (rabbit) position and the auger control in the disengaged “up” position, walk to the front of the machine.

6.Confirm that the auger has completely stopped rotating and shows NO signs of motion. If the auger shows ANY signs of rotating, immediately return to the operator’s position and shut off the engine. Wait for ALL moving parts to stop before re-adjusting the auger control.

7.To readjust the control cable, loosen the upper hex nut on the auger cable bracket.

8.Position the bracket upward to provide more slack (or downward to increase cable tension). See Figure 2.

9.Retighten the upper hex nut.

10.Repeat Auger Control Test to verify proper adjust- ment has been achieved.

When selecting a Drive Speed, use the slower speeds until you are comfortable and familiar with the operation of the snow thrower.

NEVER reposition the shift lever (change speeds or direction of travel) without first releasing the drive control and bringing the snow thrower

to a complete stop. Doing so will result in premature wear to the snow thrower’s drive system.

WARNING

Never use your hands to clean snow and ice from the chute assembly or auger housing.

The muffler, engine and surrounding areas become hot and can cause a burn. Do not touch.

Figure 2

11

Page 10 Page 12
Page 11
Image 11
White Outdoor 769-01923A warranty Chute Clean-Out Tool, To Engage Drive, To Engage Augers, Auger Control Test
Page 10 Page 12

769-01923A specifications

The White Outdoor 769-01923A is a versatile and efficient piece of equipment designed for outdoor tasks, particularly in landscaping and gardening. This machine embodies a combination of power, durability, and user-friendly features, making it a top choice among both amateur gardeners and professional landscapers.

One of the standout features of the 769-01923A is its robust engine. Powered by a high-performance gas engine, this equipment offers ample power to tackle a variety of yard work, from mowing to trimming. The engine is designed to provide reliable performance, ensuring that users can complete their tasks efficiently without frequent interruptions for maintenance or refueling.

Another significant characteristic of the White Outdoor 769-01923A is its cutting deck. The cutting deck is engineered for optimum efficiency, allowing the user to achieve a clean and precise cut every time. The deck size offers a suitable balance between maneuverability and coverage, enabling users to navigate tight spaces while still covering a larger area swiftly.

The equipment also boasts advanced design features that enhance usability. One of these is its ergonomic handles, which provide comfort during prolonged use. The adjustable height feature allows users to customize their mowing or trimming experience according to their individual preferences and the terrain being worked on. This adaptability makes it an excellent choice for diverse outdoor conditions.

In terms of technology, the White Outdoor 769-01923A utilizes advanced cutting mechanisms that ensure less clogging and a smoother operation. This technology significantly enhances the device's overall performance, particularly when handling thicker grasses or uneven terrains. Additionally, the machine is designed with ease of maintenance in mind, featuring accessible components for quick servicing.

Moreover, the durability of the 769-01923A sets it apart from many competitors. Constructed with high-quality materials, it is built to withstand the rigors of outdoor use. Whether facing rugged terrains or variable weather conditions, this equipment is designed to endure, ensuring a long life span and making it a valuable investment for anyone serious about outdoor work.

In conclusion, the White Outdoor 769-01923A is a powerful, reliable, and user-friendly tool that stands out in the landscaping and gardening market. With its robust engine, efficient cutting deck, ergonomic design, and durable construction, it delivers exceptional performance for various outdoor tasks. Whether for professional landscaping or residential gardening, this machine is equipped to meet the demands of any user effectively.