7

If the snow thrower will not be used for 30 days or longer, or if it is the end of the snow season when the last pos- sibility of snow is gone, the equipment needs to be stored properly. Follow storage instructions below to ensure top performance from the snow thrower for many more years.

Off-Season

Storage

WARNING

Never store snow thrower with fuel in tank indoors or in poorly ventilated areas, where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or

gas appliance.

Fuel left in engine during warm weather deteriorates and will cause serious starting problems.

Never use engine or carbu- retor cleaning products in the fuel tank or permanent damage may occur.

Preparing Engine

NOTE: Refer to the engine manual for more detailed information on preparing the snow thrower engine for storage.

Short-Term Storage

It is important to prevent gum deposits from forming in essential fuel system parts of the engine such as the carburetor, fuel filter, fuel hose, or tank during short-term storage (15-30 days). To prevent this, treat the fuel system using a fuel stabilizer.

Fuel stabilizer (such as STA-BIL™ or ULTRA-FRESH™) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow it to reach the carburetor.

WARNING: Never store snow thrower with fuel in tank indoors or in poorly ventilated areas, where fuel fumes may reach an open flame, spark or pilot

light as on a furnace, water heater, clothes dryer or gas appliance.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of

acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

Long-Term Storage

To avoid engine problems, the fuel system should be emptied before storage for 30 days or longer.

WARNING: Fuel left in engine during warm weather deteriorates and will cause serious starting problems.

1.Run the engine until the fuel tank is empty and it stops due to lack of fuel. Do not attempt to pour fuel from the engine.

WARNING: Never use engine or carbu- retor cleaning products in the fuel tank or permanent damage may occur.

2.Remove the spark plug and pour one (1) ounce of engine oil through the spark plug hole into the cylinder. Cover spark plug hole with a rag and crank the engine several times to distribute the oil. Replace spark plug.

Preparing Snow Thrower

•When storing the snow thrower in an unventilated or metal storage shed, care should be taken to rustproof the equipment. Using a light oil or silicone, coat the equipment, especially any chains, springs, bearings and cables.

•Remove all dirt from exterior of engine and equipment.

•Follow lubrication recommendations.

•Store equipment in a clean, dry area.

22

Page 17 Page 19
Page 18
Image 18
White Outdoor 769-01923A warranty Off-Season Storage, Preparing Engine, Preparing Snow Thrower, Short-Term Storage
Page 17 Page 19

769-01923A specifications

The White Outdoor 769-01923A is a versatile and efficient piece of equipment designed for outdoor tasks, particularly in landscaping and gardening. This machine embodies a combination of power, durability, and user-friendly features, making it a top choice among both amateur gardeners and professional landscapers.

One of the standout features of the 769-01923A is its robust engine. Powered by a high-performance gas engine, this equipment offers ample power to tackle a variety of yard work, from mowing to trimming. The engine is designed to provide reliable performance, ensuring that users can complete their tasks efficiently without frequent interruptions for maintenance or refueling.

Another significant characteristic of the White Outdoor 769-01923A is its cutting deck. The cutting deck is engineered for optimum efficiency, allowing the user to achieve a clean and precise cut every time. The deck size offers a suitable balance between maneuverability and coverage, enabling users to navigate tight spaces while still covering a larger area swiftly.

The equipment also boasts advanced design features that enhance usability. One of these is its ergonomic handles, which provide comfort during prolonged use. The adjustable height feature allows users to customize their mowing or trimming experience according to their individual preferences and the terrain being worked on. This adaptability makes it an excellent choice for diverse outdoor conditions.

In terms of technology, the White Outdoor 769-01923A utilizes advanced cutting mechanisms that ensure less clogging and a smoother operation. This technology significantly enhances the device's overall performance, particularly when handling thicker grasses or uneven terrains. Additionally, the machine is designed with ease of maintenance in mind, featuring accessible components for quick servicing.

Moreover, the durability of the 769-01923A sets it apart from many competitors. Constructed with high-quality materials, it is built to withstand the rigors of outdoor use. Whether facing rugged terrains or variable weather conditions, this equipment is designed to endure, ensuring a long life span and making it a valuable investment for anyone serious about outdoor work.

In conclusion, the White Outdoor 769-01923A is a powerful, reliable, and user-friendly tool that stands out in the landscaping and gardening market. With its robust engine, efficient cutting deck, ergonomic design, and durable construction, it delivers exceptional performance for various outdoor tasks. Whether for professional landscaping or residential gardening, this machine is equipped to meet the demands of any user effectively.
Top Page Image Contents