Attaching Discharge Chute
Your lawn mower was shipped as a mulcher. Remove the mulching cover and attach the
•Remove three plastic wing nuts holding the mulching cover to the deck. See Figure 6A. Keep the cover in a safe place for future use. Save the wing nuts.
•Place the
•Align the three slots on the chute with the hardware slots on the deck.
•Secure with the wing nuts earlier removed. Tighten the wing nuts.
A
B
Mulching
Cover
Top Flange goes under
top edge of opening on deck
Chute
Align the slot here (only two shown)
FIGURE 6
IMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.
SECTION 7: CONTROLS
Read this operator’s manual and safety rules before operating your lawn mower. Compare the illustrations in Figure 7 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
The operation of any lawn mower can result in foreign objects being thrown into the operator’s eyes thus causing severe eye damage. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.
Blade Control Handle
Recoil Starter
Engine
Caster Lock
Mulching | Spark Plug |
Cover |
|
Discharge
Chute
FIGURE 7
Oil Fill | Gas Tank | |
Plug | ||
|
Throttle |
|
Control | Primer |
|
9
