iHome IHM61W, IHM60 Using the iHM60, Connecting the iHM60, Charging the iHM60, Extend the Speaker

Extend the Speaker

USB Connection

LED

Power Switch

USB Connection

Using the iHM60

To unlock and expand the speaker, grip the top and bottom and give a small twist counter-clockwise. DO NOT pull hard once open, as the built in spring will automatically extend the speaker to its proper position

Press speaker down from the top and twist clockwise to lock in place.

Connecting the iHM60

•Connect the mini-USB plug to the audio/charge input jack on the speaker.

•Connect the stereo 3.5mm audio plug to the headphone jack or line-out of any audio device.

•Slide the Power Switch of the speaker to the ON position. The blue power light will come on.

•Press play on your audio device and adjust its volume to listen to audio.

•If you wish to “daisychain” iHM60 speakers, connect the 3.5mm audio plug to the Line Out Jack on an iHM60 that is

already connected to an audio source (see above) and the mini-USB plug to the audio input jack on another iHM60.

Charging the iHM60

Line-out Jack

mobile phone PSP iPod MP3/MP4

PC

Laptop

Connect To Audio Input Source

Note: the larger USB plug is used for charging only, not for audio. Please refer to next section for charging instructions.

Charging the iHM60

The iHM60 is powered by a rechargeable battery in the speaker. When the blue power light dims, or if you start to notice sound distortion at higher volumes, it's time to recharge the battery.

•Connect the larger USB plug to a powered USB port, such as

that on a computer. The light on the speaker will turn to red while charging and turn blue when fully charged.

Note: you can continue to listen to the speaker while it is charging