4
Operating
Know Your Snow Thrower
| ����������� |
������������� | ������������������������� |
| |
| ������������� |
��������������������� |
|
Your Snow
Thrower
WARNING
Read, understand, and follow all instruc- tions and warnings on the machine and in this manual before
�������������� �������
��������
����������
����
������
| ��������������� |
����������� | ��������������� |
����� | ������ |
| ����������������������� |
| ������ |
| ��������� |
| ��� |
| ������ |
��������� | ������� |
���������
�������
operating.
Figure 1
Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine
Now that you have set up your snow thrower for operation, get acquainted with its controls and features. These are described below and illustrated this page. This knowledge will allow you to use your
new equipment to its fullest potential.
NOTE: For detailed starting instructions and more information on all engine controls, refer to the Tecumseh Engines manual packed separately and Starting The Engine on page 10 of this manual.
Choke Control
The choke control is found on the rear of the engine and is activated by rotating the knob clockwise. Activating the choke control closes the choke plate on the carburetor and aids in starting the engine.
is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.
Shift Lever
The shift lever is located on the right side of the handle panel. Place the shift lever into any of eight positions to control the direction of travel and ground speed.
Forward
There are six forward (F) speeds. Posi- tion one (1) is the slowest and position six (6) is the fastest.
Reverse
There are two reverse (R) speeds. One (1) is the slower and two (2) is the faster.
Throttle Control
The throttle control is located on the engine. It regulates the speed of the engine and will shut off the engine when pushed down completely.
Primer
Depressing the primer forces fuel directly into the engine’s carburetor to aid in
Oil Fill
Engine oil level can be checked and oil added through the oil fill.
����
8