3.Depress the REVERSE PUSH BUTTON (Orange, Triangular Button) at the top, right corner of the key switch module. The red indicator light at the top, left corner of the key switch module will be ON while activated. See Figure 11.

4.Once activated (indicator light ON), the tractor can be driven in reverse with the cutting blades (PTO) engaged.

5.Always look down and behind before and while backing to make sure no children are around.

6.After resuming forward motion, return the key to the NORMAL MOWING position.

IMPORTANT: The REVERSE CAUTION MODE will remain activated until:

a.The key is placed in either the NORMAL MOWING position or STOP position.

b.The operator leaves the seat (Models with Electric PTO ONLY).

c.The operator engages the parking brake by fully depressing the brake pedal and holding it down while gently pushing the parking brake button inward (Models with Manual PTO ONLY).

 

Reverse

Indicator

Push

Button

Light

 

 

Reverse

Stop

Caution Mode

Position

Position

 

 

Start

 

Position

Figure 11

Engaging the Parking Brake

To engage the parking brake:

•Fully depress the brake pedal and hold it down with your foot while gently pushing the parking brake button inward.

•Hold the parking brake button in while removing your foot from the brake pedal.

•Once engaged, the parking brake button and the brake pedal will lock in the “down” position.

To disengage the parking brake:

•Slightly depress the brake pedal.

NOTE: The parking brake must be engaged if the operator leaves the seat with the engine running or the engine will automatically shut off.

Setting the Cutting Height

Select the height position of the cutting deck by placing the deck lift lever in any of the six different cutting height notches on the right side of the fender. Then adjust the deck wheels so that they are between ¼-inch and ½- inch above the ground when the tractor is on a smooth, flat surface such as a driveway.

WARNING: Keep hands and feet away from the discharge opening of the cutting deck.

NOTE: The deck wheels are an anti-scalp feature of the deck and are not designed to support the weight of the cutting deck.

Refer to Leveling the Deck, in the MAKING ADJUSTMENTS section of this manual for more detailed instructions regarding various deck adjustments.

Starting the Engine

WARNING: Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

NOTE: Refer to the TRACTOR SET-UPsection of this manual for Gasoline and Oil fill-up instructions.

•Insert the tractor key into the ignition switch.

•Place the PTO (Blade Engage) knob (or lever) in the disengaged (OFF) position.

•Engage the tractor’s parking brake.

•Activate the choke control.

•Turn the ignition key clockwise to the START position. After the engine starts, release the key. It will return to the ON position.

IMPORTANT: Do NOT hold the key in the START position for longer than ten seconds at a time. Doing so may cause damage to your engine’s electric starter.

•After the engine starts, deactivate the choke control and place the throttle control in the FAST position.

NOTE: Do NOT leave the choke control on while operating the tractor. Doing so will result in a "rich" fuel mixture and cause the engine to run poorly.

15

Page 14 Page 16
Page 15
Image 15
White Outdoor LT-542K, LT-942K, LT-946K manual Engaging the Parking Brake, Setting the Cutting Height, Starting the Engine
Page 14 Page 16

LT-542K, LT-942K, LT-946K specifications

The White Outdoor LT-542K, LT-942K, and LT-946K are robust riding lawn mowers known for their reliability and performance, making them popular choices among homeowners and landscapers alike. Each model is designed to tackle large yards with ease, providing an efficient and effective mowing experience.

The LT-542K model features a 42-inch cutting deck, allowing users to cover more ground in less time. It is powered by a reliable Kohler engine, which delivers ample power to handle various mowing conditions. The LT-542K also comes equipped with a hydrostatic transmission that offers smooth, effortless operation, allowing users to adjust their speed without the need for shifting gears. This feature is particularly useful for navigating tight spaces and uneven terrain.

Moving on to the LT-942K, this model takes performance a step further with a larger 48-inch cutting deck. This increased width allows for quicker mowing over larger areas, reducing overall mowing time. The LT-942K is also equipped with a powerful Briggs & Stratton engine, renowned for its durability and efficiency. The automatic transmission provides an easier driving experience, while the comfortable seating and ergonomic controls ensure that users can operate the mower for extended periods without discomfort.

The LT-946K model is the flagship of these series, boasting a 46-inch cutting deck that strikes a balance between maneuverability and cutting capacity. This model further enhances the mowing experience with its advanced features, including a mulching capability that allows users to finely chop grass clippings, returning nutrients back into the lawn. The LT-946K is designed with a heavy-duty steel frame to withstand rigorous usage, ensuring longevity and robustness.

All three models share essential characteristics such as easy cutting height adjustment, allowing users to customize their lawn’s finish. They also feature reliable, efficient engines that can easily tackle tough mowing conditions. In addition, their intuitive controls and user-friendly designs make them accessible for both seasoned operators and those new to riding mowers.

In summary, the White Outdoor LT-542K, LT-942K, and LT-946K offer a combination of power, durability, and ease of use. Whether for residential use or professional landscaping, these mowers deliver performance that meets the needs of various users, proving to be valuable assets in lawn care maintenance.
Top Page Image Contents