Manuals / White Outdoor / Lawn and Garden / Snow Blower

White Outdoor Single-Stage Snow Thrower warranty Replacing Belt, Engine, Lubrication

Models: Single-Stage Snow Thrower

1 20
Download 20 pages 8.54 Kb
Page 11
Image 11

Replacing Belt

WARNING: Before servicing, repairing, or inspecting, disengage the control bail and stop engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting.

Remove the belt cover by removing five hex screws. See Figure 6-3. Then simply pull the belt off by grasping it from the bottom of the auger pulley and pulling off. Once you remove the belt from the pulleys, you can push down on the idler pulley to release the belt from under belt keeper.

To replace the belt follow these instructions and refer to Figure 6-4:

1.Push down on the Idler pulley.

2.Put belt on top of the auger pulley under belt keeper.

3.Thread belt around engine pulley.

4.Push belt over bottom of auger pulley.

Reinstall the belt cover removed earlier.

Engine

1.Refer to the separate engine manual for all engine maintenance procedures.

2.Check engine and snow thrower frequently for loose hardware, and tighten as needed.

Lubrication

Lubricate pivot points on the control handle and the extension spring at the end of the control cable with a light oil once every season and before storage of the snow thrower at the end of the season.

Replacing Auger Paddles

The snow thrower auger’s rubber paddles are subject to wear and should be replaced if any signs of excessive wear is present.

IMPORTANT: Do NOT allow the auger’s rubber paddles to wear to the point where portions of the metal auger itself can come in contact with the pavement. Doing so can result in serious damage to your snow thrower.

NOTE: Call 1-866-840-6483 for information regarding the price and availability of Auger Kit 753-04472 or contact an authorized Troy-bilt Service Dealer in your area.

To change the rubber paddles, proceed as follows:

1.Remove the existing rubber paddles by unthreading the self-tapping screws which secure them to the auger. See Figure 6-5.

2.Secure the replacement rubber paddles to the auger using the hardware removed earlier.

Idler Pulley

Belt Keeper

To remove, pull belt here

Figure 6-3

1

3

2

4

Figure 6-4

Figure 6-5

6

Adjustments

&

Maintenance

WARNING

Before servicing,

repairing, or inspect-

ing, disengage the

control bail and stop engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting.

IMPORTANT:

Do NOT allow the

auger’s rubber paddles

to wear to the point where portions of the metal auger itself can come in contact with the pavement. Doing so can result in serious damage to your snow

thrower.

11

Page 10 Page 12
Page 11
Image 11
White Outdoor Single-Stage Snow Thrower warranty Replacing Belt, Engine, Lubrication, Replacing Auger Paddles
Page 10 Page 12

Single-Stage Snow Thrower specifications

The White Outdoor Single-Stage Snow Thrower is designed for efficient snow removal, combining power and convenience into a compact unit ideal for residential use. This snow thrower is particularly suited for light to moderate snowfall, making it an essential tool for homeowners seeking to maintain clear driveways, walkways, and patios during winter months.

One of the standout features of the White Outdoor Single-Stage Snow Thrower is its powerful engine, which allows for easy start-ups even in the coldest weather. The snow thrower typically comes with a reliable 4-cycle engine, providing optimal performance and smooth operation. This engine eliminates the need for mixing fuel and oil, simplifying the refueling process.

The single-stage design of the snow thrower makes it lightweight and easy to maneuver while still delivering impressive snow-clearing capabilities. The auger system efficiently scoops up snow and throws it out of the chute with remarkable force, allowing users to uncover large areas quickly. With a clearing width of around 21 inches, it can handle most driveways and sidewalks with ease.

Ergonomics is a key consideration in the design of the White Outdoor Single-Stage Snow Thrower. It features a convenient adjustable handle, which provides comfort and control during operation. The chute can be easily directed to the left or right, enabling precise snow placement exactly where you want it.

Another important characteristic of this snow thrower is its ability to handle different snow types. Whether the snow is light and fluffy or heavier and wetter, the machine is engineered to tackle a variety of conditions. Additionally, its low-profile design allows it to effectively clear close to the ground, leaving surfaces clean and free of residual snow.

For added safety and durability, the White Outdoor Single-Stage Snow Thrower incorporates high-quality materials and components. Its rugged construction ensures that it can withstand the rigors of frequent use during harsh winter conditions.

In summary, the White Outdoor Single-Stage Snow Thrower is a reliable, efficient, and user-friendly solution for homeowners seeking to simplify snow removal. With its powerful engine, ergonomic design, and effective clearing capabilities, this snow thrower stands out as a valuable addition to any winter toolkit.