SECTION 4: CONTROLS
Lift Handle | Right Control |
Panel | |
PTO Switch |
|
Ignition/Light Switch |
|
Hour/RPM Meter |
|
Front |
|
Figure 3
HOUR/RPM METER
The hour/RPM meter is an LCD (liquid crystal display) display that is located on the right control panel. The meter’s display stays on continuously. (See Figure 3)
•HOUR METER: The meter functions as an hour meter. The hour value is the number of hours of engine operation. Use the hour value to determine when maintenance is required and to cost jobs.
•RPM METER: When the engine is on, the meter functions as an engine RPM gauge.
IGNITION/LIGHT SWITCH
Off
On/Light
On
Start
Figure 4
The ignition/light switch is located on the right control panel and is used to start the engine. It is a four position switch. (See Figure 4)
•In the OFF position the engine is not running.
•In the ON/LlGHT position the engine is running and the head light is on.
•In the ON position the engine is running and the head light is off.
•In the START position the starter is engaged to the engine flywheel.
7
